A loud exhaust noise suddenly started on my '90 XJ 4.0L today. I found
an open port on the exhaust manifold just above the pipe flange and
below the EGR port. Capped it off with a scrap of lead and a hose clamp
to eliminate the noise.

I'm having to remove the nice moulding from the side of my '00 wrangler to make way for a set of skid plates......
Theres a series of about 6 rivets on each side that secure a support strip for the moulding...
Buddy told me to drill 'em out... I busted my 1/8 bit...(which is ...

My stepfather finally decided to junk the Jimmy that his daughter rear
ended someone with a year ago, and offered me the tires (with about
3-4/5th the tread left), so my only cost would be to have them
remounted.

Okay, I just got the drivers side mount off.  To my surprise there was an
extra piece of metal between the frame bracket and the mount itself.  It
appears to be on the other mount as well.  I can't find this in any of my
manual's diagrams.  Could this just be something that a ...

My jeep lightly smokes (white/blue) at all engine speeds.  The plugs are constantly fouled with a light black powder that smells of gasoline.  I did a compression test today.  Each cylinder registered 65-75 on the first crank and then quickly jumped to 125.  In the end, each ...

I read something in the last week recommending a fuel addative with
techron.  Could somebody please refresh my memory as to what exactly
this product was?  Is it recommended and where can I find it? (I'm in
Canada)

I have recently had some problems with my "little" girl.  and I was
wondering how I should go about displining her for her actions.  I am at a
total loss here and as she stoll my jeep and still hasn't come home yet.  I
have set up a web page to aid in my search.  Any advice you all ...

The original exhaust manifold (header right?) is leaking/cracked. I don't
really have the cash to fix it (and buy that borla header + have it installed)
right now. So what's the worst that could happen if I don't fix it? A bigger
leak? A leaner mixture? The header on my old '70' ...

I'm going to change my tranny fluid soon and was hoping to go to
synthetic, but I've read the posts (and manual) about Mopar only and
the Pennzoil/Texaco/Havoline/Quaker Synchromesh alternatives.
What's the final word on this... is there a synthetic I can rely on?

I do not belong to an off-road club and I would like to know what trail
flags are used for.

I don't know how much truth there is to this, but I am planning on
lifting my '97 Cherokee Country 6 inches, with 33x12.50 tires. My
friend claims that the stock DANA axles on the jeep will suffer. He
claims that the axles will "drop out" within hours of travel on large

Hey gang, found a massive track system for yer heeps. The crane is out there
to aid in assembly but ya might need some other mods ...
members.allstream.net/~kaessie/jeepin/JeepTrack1.jpg
members.allstream.net/~kaessie/jeepin/JeepTrack2.jpg

Well it is getting time to replace the exhaust on my '98 XJ and I'm
thinking about upgrading the intake and headers as well...  Anybody out
there have one and how well does it work (TJ, ZJ, WJ, XJ opinions
welcomed.)

Whatever happened to Rubicon Cargo Trailers vs. DC?
Tom

I'm thinking of trading in my Cherokee on one of the last 2004 Grand Cherokees
and still have some unanswered questions after reading through all the JCG
literature from the dealer:
1) Before I decide on a 2004 for sure, does anyone have any photos of the 2005