I'm going to change the oil in my rear diff as soon as I can get
my hands on the proper oil for it. It's a D35c on a 1994 ZJ. The
manual calls for 75W-140 oil because the car has (or rather HAD)
a tow hook. That kind of oil is close to impossible to find in the

As of Tuesday this week I became the proud owner of a '91 XJ Laredo with
Selec-Trac 4 wheel drive.  I have never owned a Jeep before and one of the
major reasons for the purchase was all the great info the experts keep
posting to the web and newsgroups.  I just found oil in the air ...

Hi all, I just bought my 99 Wrangler.  It has a manual transmission, about
45K on it and has never been taken offroad.  I notice that there is a fair
amount of noise coming from what seems to be the driveline somewhere (Pretty
much right under the front seats) at lower speeds/RPMs ...

Hey everyone,
This truck looks interesting - I can't find much in-depth information...
http://www.crosslander4x4.com/
What do you all think of this thing? It may not be a Jeep, but at least it

First, I want to thank all of you guys for the great input to all
questions asked here. Mike, Bill and all others.... I lurk and read
with the best of them. The info provided is outstanding.
So, I'm under my Jeep tonight, greasing...I replaced the rear main seal

My son crunched the right fender of his 2000 Cherokee, and the metal is too
warped/stretched to repair. Have any of you had experiences with aftermarket
fenders? I'd rather get a used fender from a salvage yard, but the right
fender seems to be a popular place to crunch Jeeps around ...

You Gotta See This Willys Jeep - ancient radical mod
I figured everyone would get a real kick out of it and should lead to some good
discussion
go to:

I have a 1999 Jeep Cherokee with about 55K miles on it.
The last time I took it for regular oil change to a new garage, the
mechanic informed me that the transfer case was alomst dry so he added
the oil. Aparently the old mechanic had never checked the transfer

I'm looking for a combo bracket that will let me relocate my factory mirrors
to the windshield hinge and allow for a off-road light to be mounted as
well.  I want one that will mount to the lower side of the hinge since the
upper portion will most likely be populated with the ...

http://members.cox.net/wilsond/front_antisway/
Not my best work.   Almost forgot to take pictures.

I was planning on adding 3/4" spring spacers to level the front of my
TJ when I read the statement below on a Jeep web site.  I currently
have a 2" OME suspension lift installed.  If I install the spacers
will I require an adjustable track bar or will the 3/4 spacer have a

1.) Until it goes REALLY bad, I want the nice carpet my TJ came with
(then I'll Rhino Line it). It's wet all the time, however (at least on
the passenger side, like everyone's is). My idea: I went out and got
Rustoleum clear spray epoxy. I want to pull the carpet out, mask the

looking to go 4" on a 82 CJ7.  What lifts do have some of you have or know
good and bad about.
Looking at Rubicon Express, Hellfire, Rancho and any others.
Thanks,

Just thought I'd share this with the group....my son is a Cub Scout and we've
been working very hard on his Pinewood Derby project Jeep.
http://www.geocities.com/basscraft.geo/img_2054.jpg
The race is Friday, the car is almost finished, we just have to remove some

I just bought a stock 91 wrangler and would like to go with 35's x 12.5.
What kind and size of lift should I look at?  spring over? I would prefer
not to raise the body unless I have to.   I would also like to greatest
articulation possible( of course for the least cost)