| Thread | Last Post | Replies |
|
| Posting | 14 Mar 2004 16:28 GMT | 6 |
Sorry about the redundant posts, I don't know what is up with that. Just be assured that I am not being persistent about posting, it is just doubling up for some reason. Maybe one of you techies have some advice on that. Jerry
|
| OT: Progressive Insurance good or bad? | 14 Mar 2004 16:20 GMT | 21 |
A little off topic, but I do have a 97 TJ. :o) I 've was with Allstate for 5 years and recently with USAA for over 8 years. I just received a quote from Progressive for $600 less every 6 months than I'm paying now.
|
| Engine misfire and low RPMs | 14 Mar 2004 16:15 GMT | 21 |
I've been having some engine problems and I was hoping you all could give me some advice. I was having a serious problem with my engine misfiring. My check engine light came on and I took it to the dealership. The mechanic said my spark plugs were bad and they wanted
|
| 4.0/258 Conversion - Major Coolant Leak | 14 Mar 2004 15:18 GMT | 10 |
I just finished 95% of my 4.0 Conversion on my 85 258 CJ7. The jeep started great yesterday. Today I was driving it to get the 02 sensor and exhaust finalized. 2 miles into the trip smoke started coming from under the speedometer. I pulled the Jeep over and shut it off. I ...
|
| Seat belt help | 14 Mar 2004 12:47 GMT | 2 |
Well, I've about got my wife's new(to her) YJ squared away. I've fixed the converter and muffler, I've fixed the cracked exhaust manifold, I've fixed the coolant leak and the oil leak, and put a stereo in it. About the only things I have left to do are the rear
|
| "Riddle at the pump" | 14 Mar 2004 06:40 GMT | 3 |
Riddle at the pump Life: Annapolis resident Mike Reinhard figured that regular unleaded gasoline was cheaper, so he pumped the 87-octane formula into his Jaguar. The Internet consultant already had downgraded from premium to
|
| I FOUND A 76 CJ5 | 14 Mar 2004 04:11 GMT | 10 |
Oh, help. I "found" a 76 CJ5 forsale close to home. I was amazed at the condition of this Jeep. Floors are original, tailgate original. Inner fenders original. The only rust I could find was on the floor near the side at the door entrance where water usually sits. The owner ...
|
| owners manual | 14 Mar 2004 04:00 GMT | 2 |
HI.. I am looking for an owners manual for a 98 Grand Cherokee Limited, are there any sites that I can go to ? I've tried ebay but no luck. TIA
|
| Seat Heater Not Working in 98 GC | 14 Mar 2004 01:20 GMT | 1 |
I have searched google and have found a bunch of information on why the seat heater would not work. Both driver and passenger seats are out. I am planning to fix them this weekend, if any one has had success fixing their heated seats or has the schematic please let me know. I am ...
|
| New to Jeep, new to group. 2 questions: | 14 Mar 2004 00:50 GMT | 6 |
Hi all! I just bought my first Jeep - a 1999 Wrangler TJ 4.0L Sport. It has 45K on it and is in awesome condition (other than differential...see below). I'm really getting into the Jeep thing and looking forward to talking with you all. Here are my questions:
|
| Identifying Jeep parts. | 13 Mar 2004 23:57 GMT | 7 |
Have a bit of a techy question, here goes! My sister has bought and is restoring a 1944 willys overland Jeep, while it was being taken apart for a nut and bolt rebuild the guy doing it looked underneath and told her it has a CJ5 rear axle, so its coming off, and the proper
|
| 97TJ, back seat, jesus pin | 13 Mar 2004 20:53 GMT | 4 |
I'm referring to the pin that holds the back seat into one of the mounts on the side and allows it to flip. Mine flipped into the back yard! Can I go to the hardware store and get something like it?
|
| 1999 Jeep Grand Cherokee Question - Oil pressure gauge problem | 13 Mar 2004 15:40 GMT | 5 |
1999 Jeep Grand Cherokee Larado 2 Wheel Drive I have had the following problem for several months: The oil pressure gauge at startup will register max oil pressure, I can turn
|
| DAMPER | 13 Mar 2004 15:16 GMT | 12 |
IT was the damper . JERRY
|
| 2000 Wrangler blower fan switch | 13 Mar 2004 14:11 GMT | 15 |
I have read about the resistors being the culprit when your switch only works on the high setting, but my switch works on the 2nd setting as well as the high setting. Is this the resistor pack as well, or has my switch started to go bad? I have a multimeter, but what
|