| Thread | Last Post | Replies |
|
| make money fast & easy | 13 Mar 2004 06:44 GMT | 1 |
MAKE MONEY!!!MAKE MONEY!!! MAKE THOUSANDS!!! I found this on a bulletin board and decided to try it: I don't care about the useless pre-fabricated crap this message usually says. All I
|
| Part help | 13 Mar 2004 05:03 GMT | 3 |
I have a 2004 Sahara that did not come with a front tag mount. My local dealer cannot find this part in their catalog and for the life of me I can't find it online...tried quadrateck, jcwhitney, etc....if anyone can offer any help i'd greatly appreciate it...
|
| Doetsch 8000 Ride Quality | 13 Mar 2004 02:36 GMT | 2 |
Anyone had any experience with DT8000's? I'm interested in the ride quality. I've got DT3000's now and like them a lot, but am upgrading to longer shocks and DT recommends the 8000s fro the off roading I do. Not interested in a bone jarring ride, that's for sure.
|
| Fuel Pump Cut-Off | 13 Mar 2004 02:36 GMT | 4 |
What's the best way to put in a fuel pump cut-off in a TJ? Should I splice the positive by the pump, or should I cut-off at the fuse box?
|
| Goofy electrical Problem needs Help | 12 Mar 2004 23:33 GMT | 5 |
I get this intermitantly, I wonder if anyone can help ? '97 TJ Sahara in otherwise great condition. Every now and then when I turn the key the Jeep starts and the tape deck goes into fastforward ! Pretty annoying. Only
|
| another tire question.. | 12 Mar 2004 23:29 GMT | 1 |
I have the 31x10.5 on my 97TJ with 3.07's An earlier post i saw says that 2000rpm minimum for 60mph, is this general knowledge or am i just not noticeing my problem because of the good ole 4.0?? Usually around 1800+ or so for 60 unless interstate. 2350 or so to do
|
| Tire locks | 12 Mar 2004 23:05 GMT | 3 |
Looks like my jeep came without any tire locks for the lug nuts. I guess it was an over sight on my part but I would have thought that would be standard equipment. Can someone recommend a good aftermarket lock? ESPECIALLY for the spare! It's just screaming "Take me"!!!!
|
| Thinking about buying a wrangler ..questions | 12 Mar 2004 20:31 GMT | 8 |
I've been looking around at late model preowned sahara's and sport. They all had the hard top. I see here that many of you also have the soft top. This may seem like a stupid question but why? What should I be looking at/for when purchasing Wrangler. Thanks
|
| Addition to the diagnostic page, CPS sensor | 12 Mar 2004 17:38 GMT | 6 |
http://members.cox.net/wilsond/cps/ Still in the works. Got to replace the little bugger this weekend. I will be interested to know if things improve
|
| Going for a Drag? | 12 Mar 2004 14:36 GMT | 6 |
Hi all, I've been lurking since March when I bought my baby Clementine: amber fire'02 TJ, and I finally have a question! A friend of mine left his CJ w/hardtop backed right up to the fence in our gravel parking lot for the winter. Another Samaritan locked his doors so we need to ...
|
| '02 Wrangler Sahara - stupid question #837 Removing Dash | 12 Mar 2004 14:25 GMT | 3 |
I want to get at my radio to find a loose speaker wire and maybe upgrade it. There is an escutcheon or whatever it should be called. The middle part of the dash that covers the radio and heater controls. I found one screw behind the ash tray but I don't see what else I need
|
| Vancouver Island | 12 Mar 2004 12:52 GMT | 5 |
We are going to Vancouver Island in late July. We have 5 days and four night to kill. We will be between Ucluelet and Victoria. We have reserved a Explorer 4x4. Any thoughts? Suggestions? Tips?
|
| good web source for bolts | 12 Mar 2004 12:35 GMT | 5 |
Does anyone know a good source for bolts. Tom Hereford 92 YJ
|
| Where can I find parts for willys pickup? | 12 Mar 2004 12:32 GMT | 7 |
I've searched until my eyes fall out and I can't find a website or company that has Jeep Willys Pickup accessories and parts?? I just bought a 1960 Jeep Willys Pickup to restore. I need to find replacement floor panels or somewhere i can get the correct sheet metal so i can make ...
|
| Question on the cracked 4.0 header. | 12 Mar 2004 12:30 GMT | 3 |
My ZJ might be going that way.. hard to tell. I am getting a rough idle (slightly better after the CPS replacement) but also a bit of rythmic noise from the rear of the engine, almost below
|