Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Jeep / March 2004

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Odd oil pressure problem in 95 Grand Cherokee09 Mar 2004 13:28 GMT5
   I've got a 95 Grand Cherokee with the 5.2 V8, somewhere in the 130k
mileage range.  I run 10w30 non-synthetic oil, and have run into something
I've not seen before.
   After engine warm-up, and just crusing down the road at 65mph, I noticed
Excuuuse Me. I was served !09 Mar 2004 11:49 GMT1
Sorry People,
     I meant Invoice, not M.S.R.P.
My a.s still hurts from the spanking I got !
         Andrew
Trouble Code Clears?09 Mar 2004 06:11 GMT3
Do the codes clear themselves after the problem is fixed?  I had one for an
O2 sensor.  When I checked the wires and connections the engine light went
off.  I'm guessing the wire was loose.
But, if so, does the trouble code clear itself?
Causes forthis noise....?09 Mar 2004 05:03 GMT2
Chattering noise, clutch area.
Rebuilt motor, and was in big hurry to reinstall. The
bearing was exposed for 3 months. Did not lube prior to
shoving the motor back in.
FOR SALE: Stock 1948 Willys CJ3A Axles09 Mar 2004 03:27 GMT3
I have the following for sale in SW Washington St. area:
Dana 25 front axle. complete drum-to-drum. Came out of a running vehicle.
Has been garaged since I bought the jeep in 2002. That is all I know
about it.
Mechanic needed in Fairfax  VA area09 Mar 2004 02:58 GMT1
I just inherited a 96 Cherokee Laredo 4.0L, upcountry package (skid
plates?) 4X4 set up for hunting in Northern Alaska (!).  I need a
recommendation for a good mechanic in the Fairfax, VA area.  I want to
get the overall condition assessed before I drive it to Illinois, or
service manual09 Mar 2004 02:50 GMT23
hey guys,
with all the talk of piston/head problems, I got to lookin for a Chilton
manual for my '02 TJ.
I don't see one out there....have they just not caught up yet??
is a cherokee engine same as a wrangler (97 TJ?)09 Mar 2004 00:16 GMT7
is a cherokee engine same as a wrangler's (97 TJ?)
4lt mpi.?
Yokohama Geolandar A/T Plus II 09 Mar 2004 00:02 GMT15
any body using 33s and happy with them? Other suggestions?
88 Cherokee Emissions Test, auto trans. trouble.08 Mar 2004 22:50 GMT3
Quick update, put in a new Cat and it did something it never did before...
Dripped water out of the exhaust pipe! woohoo!
Anyways, as for the transmission toubles... Everythign seemed fine coming
off the lift, backed up, put it in park, swept the floor, ect, drove it out
TJ Door Handle08 Mar 2004 16:11 GMT9
Need some help. I have a '99 TJ with half doors. Last night, I went to
open the door from the inside and heard a Pop! and the door wouldn't
open. The door opens with the outside handle, the locking mechanism
works, and the interior handle still has spring tension, it just
Is for sale stuff OK on this NG?08 Mar 2004 15:53 GMT1
I'd like to post an ad for my stock willys axles.
Signature

Badger, Badger, Badger, Badger,
Badger, Badger, Badger, Badger,

How much does it weigh08 Mar 2004 13:04 GMT1
Can anyone tell me what a 4.2L Long block weighs (dry) for shipping
purposes?
How about short block?
Thanks,
Tuffy console in 97TJ's08 Mar 2004 06:51 GMT1
Picked up two 97TJ's for the kids and they have those silly little shorty
consoles with no arm rest or storage. Trying to figure out how the tuffys
work and if the old shorty console has to come out. I don't plan on putting
any speakers or a stereo in there. Have not seen any ...
Front Hubs Always Locked?08 Mar 2004 05:56 GMT1
I have a 2000TJ which I've noticed some noise coming from the front left
 tire area while driving. When I jacked up the Jeep on one side and
turned the wheel the driveshaft was engaged. Is this normal? Do I need
to install a set of manual hubs to prevent this?
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.