I'm looking for some feedback from anyone that has dealt with a similar
problem.  While on vacation and driving through Colorado (west of Denver to
Durango) I ended up with a check engine light on my 2003 Overland.  This has
the 4.7HO V8.  The codes are P0325, P0132, and P0152.  I ...

I was wondering if anyone could tell me the probable cause of the typical
4.0 noise from the engine. It sounds like a bearing going but it has had it
since 2000. Had at dealer and they just tightened belt. Any guesses as to
probable fix? Or where to look? Would a new belt help. it ...

Hi.  I have a CJ5 with a 304 in it.  I had an engine fire last weekend
and my carb, distributor, coil, and lots of wiring got burned up
badly.  This morning I removed all of the destroyed parts and have
ordered some new stuff.  Going to make the swith to 4bbl from 2bbl

I have an 1987 cherokee 4 l there is no engine light ( that i can find) and
switching the key on and of has no effect, but there is a conector under
the hood for a scanner link..
is there any way to read the codes with out a scanner

I just put stock leaf springs and the front and rear of my 1988 Jeep
Wrangler. Since the leaf are the same length, the pins are in the middle of
each set, the angle of the differential did not change do I have to get the
front end aligned. I personally do not see where I have ...

Does the Liberty's 3.7 V6 have more hoarsepower than The TJ's
4.0(190HP) inline?
Which would fare better in a straight 1/4 mile with..auto shift or
standard? I'd hate to think that Buffy could out do me in the Mall lot.

Hey all
85 CJ7/258
I'm replacing the EGR on my 258 (with a Wells unit from Autozone) but I lost
the sheet with the orifice washer size/OEM part number chart. Anyone know

Just curious if anyone in here has bought one in here and if so any
thoughts? I am looking to pick up a new Wrangler this week (gotta
replace my 98 TJ) or next and noticed they are hitting the dealers
now.

I'm rebuilding my carb (thanks to advice from the group) . I have a
question for the learned. Theres a big spacer thing between
the carb and the engine (1/2 " aprox". What does it do? why is it there?
it's not indidcated in the rebuild kit, but they do provide an extra

Hey Jim ..... is that a ham(WP3JQ) call sign???
Just curious... Jeff (VE1WWH)

I was talking with a man today who owns a stamping company that stamps
most of the distributor points for distributors made in North America.
His company makes them for the big 3 as well as most after market parts
suppliers such as ACDelco.  He told me that Aluminum points last a ...

If you go with the basic tire and wheel setup, is there anything that
is different on the stock Jeep based upon that choice/configuration?
Perhaps they put different suspension components or something on at
the point of assembly? The reason I ask is that I would prefer to have

I have an 84 CJ7 and was wondering which transmission that it
originally came with.  I believe it all to be stock.  It's got the 258
I6 and the transmission is an automatic.  Renegade package if that
helps.

Hey all,
Long time lurker, periodic poster... I'm think about a 1" or 2" body lift.  How
long do these things take to do and if I can't do it myself, would your typical
mechanic or shop do it for me?  (for a fee of course)...

I've got some interesting news.  I wanted to change the fluid in my
transfercase on my 03 Overland.  I went to the dealer to get the Chrysler
recommended and the dealer told me that Chrysler told them to use Mobilfluid
424 tractor lube.  Anyone else here of this?