| Thread | Last Post | Replies |
|
| XJ Door Hinge - I'm in trouble! | 18 Apr 2004 02:13 GMT | 28 |
I'm trying to replace the hinge pin on my '92 XJ... left front lower pin WILL NOT come out! I've removed the header panel...fender...door for access and no luck. I ended up cutting the pin from the hinge but the top and bottom is still stuck in there... any ideas?
|
| Air tank to refill tires | 18 Apr 2004 00:19 GMT | 44 |
What size air tank would I need to carry to refill 4 31x10.5x15 tires from 18psi to 35psi? I would prefer to have onbaord air and not have to carry the tank, but the compressor setup is $515CND, and the air tank is only $12-$25CDN.
|
| Anyone with a feeling on permatex? | 18 Apr 2004 00:11 GMT | 7 |
http://www.permatex.com/auto/autouh.asp?automotive=yes&f_call=get_item&item_no=51813 http://tinyurl.com/yta2v Permatex anaerobic gasket maker. I can't find loctite 515 locally but NAPA has this stuff. Just wondering if anyone has used it and what the experience
|
| Doors and top off in Canada! Yee Haw! | 17 Apr 2004 21:36 GMT | 28 |
Wow is is so nice out right now and supposed to get nicer! Couldn't resist got the doors and top off and am off for a cruise to get a hub. I 'really' want to go camping for the weekend, it's calling for +15C....
|
| XJ 4.0 loses power on left turns | 17 Apr 2004 21:15 GMT | 16 |
96 XJ 4.0 AT loses power when you make hard left turns. The seller was *very* upfront w/this detail long before I did a test-drive. What do you all think? Shamus
|
| Fuel Line replacement | 17 Apr 2004 19:20 GMT | 6 |
Oh Jeep Gurus, My 85 CJ7 has a rusted out fuel return line. When you start the Jeep it will leak out gas all over the place.I crawled under it and looked at it and it looks like a major operation to change the line.Does anyone have an
|
| CJ7 Frame Needed | 17 Apr 2004 19:02 GMT | 2 |
I'm looking for a CJ7 frame any year in Northern VA. I only need the rear half about a foot forward of the wheel wells, so front end damage is not an issue. Rear suspension and axle with wheels is a plus. Thanks
|
| [Rubicon] Changes between 03' and '04? | 17 Apr 2004 14:31 GMT | 3 |
What changes were made between '03 and '04 on the Rubicon? -Muuurgh
|
| another good read | 17 Apr 2004 13:47 GMT | 1 |
http://www.zzperformance.com/zzp/info/bad_mods.htm I like the dyno on the tornado. A HP decrease. :) Who woud have thunk it? :P
|
| Buying a half restored CJ - help needed | 17 Apr 2004 06:19 GMT | 4 |
Brief history - I had an '82 CJ-7 needing cosmetic repairs and never had time for it. Sold it. Regretted it. Bought a TJ. Miss the ol' CJ. I'm looking at one now that has had sheet metal repairs and had any of
|
| 98 TJ - Factory Fog Light Troubleshooting | 17 Apr 2004 03:05 GMT | 7 |
Does anyone know anything about how this foglight switch physically works? I have encountered the following problem: - fog lights wouldn't shut off (green light stays on whether switch is
|
| Shock Question | 16 Apr 2004 23:51 GMT | 4 |
I have the RE 4.5 Super-Flex kit in the garage but the Doestch shocks are backordered a good three weeks. I liked them because they are good and inexpensive (Cheap) and if I break one, so what. So, what would be a good alternative - even higher priced. What's your favorite. I've ...
|
| hooking up plug wires on distributor | 16 Apr 2004 23:42 GMT | 36 |
Hi all. Just wondering... Suppose your 304 V8 caught on fire and the distributor burned up... So you removed it and ordered a replacement. Plug wires all burned up too. Now you get the new distributor and plug wires. Can you just choose whatever terminal you want on the
|
| website of the nanosecond. | 16 Apr 2004 19:59 GMT | 1 |
Doing the surfing bit and ran across this site. http://www.midwayautosupply.com/ Not bad, probably going to order a few things from them.
|
| 4.0 header/manifold | 16 Apr 2004 19:26 GMT | 3 |
My buddy's '98 TJ head/mani gave up the ghost, and I just caught the class action thread http://www.gtelaw.com/jeepclassaction/jeepclassactioninformation.html Do you think there's even a *chance* ???
|