| Thread | Last Post | Replies |
|
| CJ engine | 16 Apr 2004 18:46 GMT | 1 |
My dad restored a CJ7, I think that it is a '84. It really looks sharp, all black with stainless deck plate trim. The only problem with it is the engine that is too small. I think that he told me that it was a 4 cylinder. Anyway, he mentioned that there was a slight problem with ...
|
| Going to 'Glass | 16 Apr 2004 17:40 GMT | 3 |
Morning all~ I have a 94 YJ that has seen better days. Everything runs great, but now the rust has started bubbling through, thanks to living in the salt belt. I want to start converting it over to fiberglass, but there seems to be a few
|
| Online source for Spicer U-Joints?? | 16 Apr 2004 17:38 GMT | 1 |
What's a good online source for Spicer u-joints? All the local parts stores carry only Precision or some other brand I'm not familiar with. Thanks,
|
| Anything to be done about a rattling catalytic? | 16 Apr 2004 17:18 GMT | 12 |
Mine is. On my '97 TJ. I want it to stop, cheap! -jeff
|
| Unlimited | 16 Apr 2004 14:13 GMT | 2 |
My little brother just called me to tell me he picked up his new unlimited today. He ordered it from jeepwarehouse.com and had it shipped to a dealer in Tucson, where he lives. It arrived even before their demo model did, and they seemed to think he has the first one in
|
| 1955 Willys CJ5 4x4 $2450 | 16 Apr 2004 14:09 GMT | 1 |
Wife's job change (real estate) forces sale. I just started to work on this Jeep to get it to be a daily driver. The interior is out (although I still have it). This thing runs and drives with a very strong 350 Chevy engine. To see more of this Jeep, click the link below to see ...
|
| CB installed, but its noisy | 16 Apr 2004 13:47 GMT | 2 |
I have installed the CB in my TJ. The 120 cm antenna came with 4.5m wire with prewired connectors and base. I have put the antenna on the rear bumper on the left side. The antenna cable is going under the centre console to the middle and then under the carpet all the way back to ...
|
| GC 4.0 cracked manifold | 16 Apr 2004 07:59 GMT | 12 |
Well upset. Just spent 500 ukp having exhaust manifold on my '98 GC replaced. It was cracked in three places. The replacement has flexible connections to the outer two ports. Anyone know the cause of the damage (apart from sh*te design) and is it worth claiming off Jeep for the ...
|
| '82 CJ Brake Upgrade | 16 Apr 2004 06:21 GMT | 2 |
I hate my light duty brakes - not much good with 33" tires. I want to upgrade to disc brakes on the rear and larger dia on the front. Any recommendations? Jeep is 82 CJ7 TIA! ==========================================================
|
| Mike Romain, Please Help!!!!! | 16 Apr 2004 00:55 GMT | 4 |
Good to see you still in the n/g, I've been gone a while and I could use some assistance, if you don't mind. Got an 89 YJ, Nutter bypass...had gotten some information from you in the past as to what emissions components you had connected, but lost it all in a crash. I would greatly ...
|
| FYI: Unlimited on the lot | 16 Apr 2004 00:53 GMT | 9 |
Saw an Unlimited on a lot in Virginia today: Silver with black hardtop 4.0 w/Automatic Dana 44 rear
|
| I6 engine vibration | 16 Apr 2004 00:50 GMT | 3 |
I recently replaced the failed harmonic balancer (vibration damper) on my '90 XJ 4.0L I6 5-speed. The vibration I was suffering lessened, but it is still very noticeable at around 2000 RPM (any gear, any speed). Anyone ever have any similar problems after replacing the HB on an ...
|
| O/T - AOL user info | 16 Apr 2004 00:07 GMT | 5 |
Is there any way to gather any information on an AOL user? No, I'm not stalking anyone..... well sort of I guess. I'm trying to contact someone who at one time was using an aol address I have. I have a possible first name. I have sent a few emails and they haven't bounced, so I ...
|
| 2004 vs 2005 [Rubicon] | 15 Apr 2004 23:30 GMT | 23 |
What will be the difference in these years' models? Would it be cheaper to buy a 2004 now, than to wait till the new '05 model came out? Thanks,
|
| Jeep wont run, Help Please | 15 Apr 2004 19:42 GMT | 1 |
I am trying to help a friend fix his jeep, and I need some help in diagnosing the problem. I would appreciate it if someone who has some knowledge with the fuel injections systems on a jeep could help out here. It is a 95 wrangler with the 4 cylinder engine. The jeep had been ...
|