| Thread | Last Post | Replies |
|
| project rubi step #1 | 07 Apr 2004 03:59 GMT | 17 |
http://7slotgrille.com/images/forumpics/mm.jpg the first step in my project rubi build is installing a 10,500lb. mile marker 2 speed hydraulic winch with the power out option. UPS delivered it at 6pm so i didnt have enough daylight left to install it. ill be taking off early ...
|
| pressing out ball joints... | 07 Apr 2004 00:08 GMT | 3 |
ok-so i brought the knuckles to work to use the 20-ton press. now i can't remember which way to press them out. do i press on the shaft to push them down (the top one into the knuckle, the bottom one out the bottom) or do i flip the whole thing upside down and press on the
|
| Differential internal temperature | 06 Apr 2004 22:52 GMT | 1 |
Can anyone tell me the maximum internal operating temperature of a rear differential? Reason I ask is that I'm plumbing the hose and bulkhead fittings for an air locker in an XJ D44. The locker originally came from a Wrangler
|
| Error Code | 06 Apr 2004 20:17 GMT | 1 |
Code someond tell me what error code P00138 means, I have a 2001 TJ 4.0 Sport. Thanks
|
| engine stops (2) | 06 Apr 2004 19:50 GMT | 2 |
Hi all Jeep Lovers, Some time ago, I asked for your advice about the sudden stop of the engine of a '95 cherokee. I had some usefull replies from you. I thank you for that.
|
| towing hooks for Cherokee?? | 06 Apr 2004 14:28 GMT | 2 |
Do they make bolt ons for the '97 model? Thanks, Rich
|
| Wrangler Unlimited | 06 Apr 2004 12:25 GMT | 7 |
I'm very interested in buying a new Jeep. My first Jeep. My first new car. There seem to be many options this year. The Unlimited is perfect, I am looking to start a family in the next year or so, so the extra space would be exponentially important.
|
| Liberty Diesel? | 06 Apr 2004 04:50 GMT | 6 |
I have heard rumors in the past about jeep producing the liberty with a diesel engine. Does anyone know if this is true, and if so, do you know when they are expected to release it. If you could let me know, I'd greatly appreciate it.
|
| 91 YJ Clutch Rebuild | 06 Apr 2004 04:40 GMT | 2 |
What is the best approch for rebuilding the clutch in my 91 YJ. I figured on replacing: Throw out bearing
|
| oil and changes | 06 Apr 2004 03:45 GMT | 4 |
What's the consesus of the group on brand of oil in the 6 cylinder? I've got 1700 miles on my wrangler and was going to follow the change oil every 3000 miles chart. Any comments? Rick Dowling
|
| Half Door Question | 06 Apr 2004 03:12 GMT | 2 |
My 2000 TJ has half doors. The plastic grommets that seat the window in have all broken. Jeep wants $6 apiece for them, I was wondering if anyone had an alternative that they have used successfully? Thanks,
|
| Where the is amplifier located? | 06 Apr 2004 01:43 GMT | 4 |
I'm tying to fix my Jeep Grand Cherokee TD 2.5 (1998 model): I've found an electical dispersion: aboun 0.5A wich becomes 0A if I remove the fuse #7 ... general panel, and afew more amenities I cannot easili traqslate in english and .. the amplifier!! bedly the amplifier
|
| Headlights problem ... again! | 05 Apr 2004 19:30 GMT | 6 |
Few days ago I started one post about headlights on my XJ and seemed like problem was solved after reconnecting main ground wire and many other things, but this happened again. I was so happy two days with my headlights and this evening they started flickering again.
|
| '94 Wrangler - rust spot underneath windshield | 05 Apr 2004 17:32 GMT | 2 |
I have a rust spot (paint is bubbled) about the size of a quarter just underneath the windshield, near the edge of the frame where the glass / gasket are, right smack in the center. There's probably some way that moisture is collecting in there and not vacating.
|
| first FI 4.0? | 05 Apr 2004 17:00 GMT | 3 |
When did Wranglers start getting the fuel-injected 4.0L engine? TIA B
 Signature Brian Heller
|