| Thread | Last Post | Replies |
|
| Being pulled from the jaws of hell | 05 Apr 2004 15:46 GMT | 9 |
http://jeepadventures.dyndns.org/jeep/fire/fire.html http://jeepadventures.dyndns.org/jeep/stage1/stage1.html http://jeepadventures.dyndns.org/jeep/stage2/stage2.html Stay tuned, TRUE BELIEVERS!!!
|
| Northern CO clubs | 05 Apr 2004 15:39 GMT | 2 |
New TJ owner here. Being as inexperienced as I am, I'm looking to join a club, or find a group of people who want to create one. The problem I have, I'm one of those poor, unfortunate souls who has to work Saturdays and Sundays, and therefore have no opportunity to go
|
| stolen jeep! | 05 Apr 2004 13:05 GMT | 4 |
please help if you can. see http://7slotgrille.com/forum/topic.asp?TOPIC_ID=1182 for pics and details.
 Signature Nathan W. Collier
|
| OT, English motorcycle show/ride pics | 05 Apr 2004 10:13 GMT | 6 |
The first set is my newly modified sidecar, to haul the other bike. In the show was a similar setup, much older. Most pics are fairly high definition, slow loading for those of us on phone lines. http://tinyurl.com/2ek6n
|
| More Ebay fun | 05 Apr 2004 10:02 GMT | 8 |
Bid often! http://tinyurl.com/2543j -- Paul Calman, Hathaway Pines, California
|
| Question about intake manifold | 05 Apr 2004 06:01 GMT | 3 |
Hi. I just installed an Edelbrock Performer intake manifold on my Jeep and was wondering if someone coud tell me what goes here... http://jeepadventures.dyndns.org/jeep/stage2/16.jpg See the oil filler tube with the chrome cap on it? See the threaded
|
| Cherokee Side Mirror ?? | 05 Apr 2004 04:01 GMT | 4 |
The passenger side mirror on my 94 GC popped out yesterday. I'm trying to get it back in the housing but am having difficulty. It has electric adjusters. Any suggestions? Thanks,
|
| Rubicon deal | 05 Apr 2004 00:56 GMT | 5 |
Ok...I went to a dealer in Riverside, CA...and they are willing to sell an '04 Rubicon (any Rubicon) for $200 over invoice....with rebates I will be well under invoice...what is up??...has anybody heard of a better deal in So. Cal??...are these things sitting on dealer's lots???
|
| Rear Bumper/Tire Carrier Combo | 05 Apr 2004 00:55 GMT | 1 |
Hi all. I've been researching tire carrier/bumper combos for a while and I think I've settled on the one made by Rubicon Express. Has anyone purchased one and do they like it or not?? Any other ones I should check-out before I buy??
|
| Jeep GC Where is the aplifier located? | 05 Apr 2004 00:03 GMT | 1 |
I'm tying to fix my Jeep Grand Cherokee TD 2.5 (1998 model): I've found an electical dispersion: aboun 0.5A wich becomes 0A if I remove the fuse #7 ... general panel, and afew more amenities I cannot easili traqslate in english and .. the amplifier!! bedly the amplifier
|
| Headlights problem on XJ 1992 | 04 Apr 2004 23:56 GMT | 12 |
Please, anyone can help me? Every time after about 30 minutes of driving with headlights on (even low beam only) they start flickering and then off, only parking lights stay. After one minute of waiting , i pull the switch again and lights are back
|
| Sudden vibratrion in 04 GC | 04 Apr 2004 18:21 GMT | 6 |
Cruising at 110 kays (about 70mph) my 2004 GC Overland began vibrating - it felt like (but wasn't) a flat tyre. The vibration, which was quite violent, didn't stop as the vehicle slowed, but was gone when I next drove it (about 30 minutes later) and has been felt since.
|
| '97 TJ loss of power at highway speed | 04 Apr 2004 16:55 GMT | 3 |
Hi y'all, I have a '97 TJ Sport (4.0L/6 cyl) with 90K on it. Pretty much stock except 30" tires. Last weekend while driving on the highway at 60-70 mph, the engine suddenly lost power and it dropped to 40 mph and
|
| gear change? | 04 Apr 2004 16:10 GMT | 1 |
What exactly is a carrier? I'm ordering new gears for my 81 CJ7, currently 2.73 going to 4.10 and I know I need new carriers, but what exactly are they?
|
| Jeep Heat A/C control Knobs | 04 Apr 2004 14:37 GMT | 3 |
Does anyone know where I can find knobs for the heat, A/C dash control unit. The plastic knobs keep breaking , then the metal insert turns . I want a knob made of metal that will not break. Thanks
|