I live in a rainy climate and have no garage.  Should I cover the thing?
-jeff

My new X8000i has me thinking that a  second battery would be nice to have
onboard.  Anyone care to give me the quick and dirty on what that will set me
back, and if it's indeed a good thing to do?  Is that what the other tray in
the engine compartment is for?  If so, it's for a ...

I am trying to decide which jeep I should rebuild. They both need a
lot of work, but the '75 will require emmissions testing for
registration. Are there any reasons why I should not build the '66?
Also, I have a 225 V6 and a 258 I6. Both need to be rebuilt. I am

One other thing, It gets pretty chilly in Rhode Island, anyone here in SoCal
or points in between got a CJ or YJ hard top collecting dust they want to
get rid of?

I have developed a strange noise... almost a rattle.. from what I believe is
the under/passenger side of my 99 TJ.  It doesn't happen all the time, seems
to happen mostly when it is warm and has been under a load (i.e. stop-n-go
traffic, highway driving, etc) for a while.  The ...

I've been told I should have one of the mounting bolts of my new 8000i
tack-welded onto the mount to prevent someone from simply loosening four bolts
and stealing it.  However, the manual specifically says not to do this as it
will change the metallurgy of that bolt and it could ...

Well, the day has finally come. I'm being transferred from San Diego to
Newport Rhode Island. I'm going to miss offroading in this area. I do have a
question..
Is there anyone from the New England area who can tell me where to go and

Does anyone know of a place in the Lower Mainland of B.C., Canada that
sells the Maisto die-cast models of the TJ? This place,
www.highway1imports.com supposedly sells them, but apparently that link is
not up and running yet and I do not know where they are located.

Hi all, I have just aquired a 1967 CJ5 from my in-laws and need to put a
rear seat in it for the kids.  Does anyone have one they want to get rid
of??  Just thought I'd ask before purchasing a new one.  I'd prefer the
fold down type but I'm not going to be picky right now.  

Hi! I am having a strange problem with the oil pressure light on my 1987
Cherokee (4.0).  The light is flickering on and off when I am turning
the steering wheel too far to the left or right.  This only occurs after
driving for some time and engine is hot.  The more I turn the ...

Motar won't run. It's making a noise from the flywheel when cranking.
Could the flywheel be bent causing the (crankshaft position censor) from
working? My other question is about the stator in the distributor. It
can go on two ways, does it matter which way the stator goes in the

I've got the property, a business plan, I only need $35,000-$50,000
and I am willing to pay 20% interest
             So if you're interested or know anyone who might be, I'd
appreciate an e-mail to unclefred@parrotheadfred.com

The soft top on my 99 TJ Wrangler is showing a good deal of wear between the
leading edge of the front plastic clip area and the very front of the top.
Is there any sort of "Stuff' one can apply to waterproof and reinforce that
section. It gets a work out when the top is un-clipped ...

Any one know a good source for slip covers for a 96 Cherokee?? RM~

Is there a  web site were you can order a service manual for a 2004 Jeep GC?
Any info is appreciated.
George-NY