| Thread | Last Post | Replies |
|
| 98 TJ clunk at acceleration | 19 May 2004 22:32 GMT | 8 |
Mostly when I hit a pot hole in 1st or 2nd, it definitely feels and sounds like somethings falling apart under my feet or maybe the tranny. I had a mechanic lift it and take a quick look at the underside and everything's bolted down good. Anyone have other
|
| 258 plastic valve covers | 19 May 2004 22:28 GMT | 3 |
I have gone through at least 4 plastic valve covers in the 20 years I have owned my Jeep. I liked painting them, and dressing up the engine. I finally spent the extra money and bought an aluminum cover. It runs noticably quieter and little to no oil running over!
|
| Alternative fuel found! | 19 May 2004 21:29 GMT | 4 |
Alternative fuel found... renewable source! http://tinyurl.com/2wutx
|
| Plastic valve covers | 19 May 2004 20:47 GMT | 5 |
I've purchased many plastic valve covers in the 20yrs I have owned my CJ7. I have put silicone around the oil cap, made gaskets and more. I finally broke down and purchased an aluminum cover. Runs quieter and little to no mess.
|
| NEED Carb suggestions for my 86 CJ7 | 19 May 2004 20:35 GMT | 3 |
Hey Group, My Carter BBD finally went belly up on me. Only took 7 years from it's last tune up. I'm not lying! Ready for something new on my stock 108,000 mile 258 straight six.
|
| leaky 94 YJ.... PLEASE HELP | 19 May 2004 20:34 GMT | 2 |
i've got a 94 wrangler se yj with a soft top.... everytime it rains, water drips from under the dash onto my feet and whoever is in the passenger seat. i have no idea where the water is comming from, i thought it could be the gasket between the windshield and the dash, so i ...
|
| Wanted: Black cj7 Laredo | 19 May 2004 20:18 GMT | 1 |
Looking for a v8 CJ7 Laredo if fair to great shape.
|
| Eagle 258... | 19 May 2004 17:51 GMT | 2 |
I have been semi-lurking here for a couple of weeks since I picked up an eagle wagon....hey quit laughing!! It was $250 runs great and has cold AC. Anyhow..as I was saying I have been semi-lurking (couldn't resist responding to a couple of posts) because this group, and the
|
| cj-5 '73 new tub | 19 May 2004 17:46 GMT | 7 |
I'm up in rural Alaska and can't shop except via the net so I could use some help in deciding on a product. My old original tub is rotten so needing a new one. I'm thinking fiberglass.. don't mind running a couple extra ground wires. Fiberglass seems easier to work with... and ...
|
| Drivebelt tension | 19 May 2004 17:19 GMT | 3 |
I have a '95 GCL with 4.0L six and 144K miles. Over the winter, I heard a loud squealing coming from the engine compartment when I started the engine, and lasted about 5 seconds then disappeared. It only seemed to occur at cold engine startup. Now that its warmer, I noticed
|
| air flow | 19 May 2004 16:42 GMT | 3 |
I'm putting a trottle body spacer on the weekend,from poweraid......I have 2" stainless exhaust from flowmaster and a k&N cold air intake system....and d44's. Will it make a big difference as they say.Oh it's a tj.
|
| still at a dilmmea what to do with Rubi soft top ? | 19 May 2004 16:09 GMT | 11 |
Whining again. I am still at a dilmma what to do with the soft doors and windows once removed for the summer. If you dont remove them, you sweat big time in the canvas coffin. 80+ degrees is nasty in there.
|
| Tow Strap vs Tow Chains | 19 May 2004 14:58 GMT | 9 |
A while back I picked up some nice chains at a yard sale and had planned to used them if needed for towing. Then I noticed on some of the jeep clubs sites they specify tow straps, not chains. Why is that? Why are tow straps better? Recoil damage if it brakes?
|
| Replacing 94 YJ Cooling System 4.0L | 19 May 2004 12:30 GMT | 2 |
Just ordered a 3 core all metal copper rad, all new hoses, clamps, thermostat w/ gasket. I also want to replace the water pump and tube that goes to the heater core. All the hoses and clamps are OEM. I currently have original hoses
|
| Mike, here's the plugs after about a 10 to 15 mile run after new distributor and fresh rebuild | 19 May 2004 04:34 GMT | 14 |
Mike, here's a look at the plugs after rebuild and I just replaced the distributor. http://members.bigvalley.net/wuji/jeep/plugs.jpg What do you think about this?
|