| Thread | Last Post | Replies |
|
| On putting a CJ front clip on a YJ... | 16 May 2004 01:58 GMT | 2 |
I think most YJ owners have wondered about it, in idle moments - just looked at the Barbie-Car square headlights and misshapen grille and thought, how hard would it be? Well, I'm learning - I'd had my fill of the avant-garde styling on my '94 YJ and decided to make it, ...
|
| CJ front clip on a YJ... | 15 May 2004 21:12 GMT | 1 |
I think most YJ owners have wondered about it, in idle moments - just looked at the Barbie-Car square headlights and misshapen grille and thought, how hard would it be? Well, I'm learning - I'd had my fill of the avant-garde styling on my '94 YJ and decided to make it, ...
|
| What's the difference between YJ and TJ? | 15 May 2004 19:51 GMT | 4 |
YJ = Square head lights? I'm being lazy and just going straight to the experts here. -Muuurgh
|
| Looking for cheap white or black wagon wheels | 15 May 2004 17:00 GMT | 2 |
What's the cheapest place for a set of 8x15 wagon wheels? I need to replace the 9x16 wheels on my M416 trailer. I'm tired of trying to find tubes for the military wheels and the stock rims. MW
|
| Need two stock '96 JGC rims, 5 spoke star kind | 15 May 2004 14:24 GMT | 2 |
Does anyone have a set of two lying around? mw
|
| Muffler work (DIY) | 15 May 2004 12:53 GMT | 1 |
For some reason I've always had the impression muffler work was beyond the average joe. That is, you would need weld to install a muffler. Got to thinking about it today while my jeep was on the rack and it looks pretty simple. I just don't know how the pieces are put together.
|
| Hurst Jeepster Site | 15 May 2004 03:32 GMT | 5 |
Just wanted to let you guys know that we just launched a new site at www.hurstjeepster.com (or www.hurstcommando.com) It contains a detailed history of the Hurst Jeepster as well as historical pictures, pictures of all the owners Hurst's we have found so far, and it
|
| Wrangler sales MUST be up | 15 May 2004 02:19 GMT | 7 |
Sales must be up. They reduced the $2000 rebate to $1000 on the Wrangler. Financing is at 0/1.9/2.9 for 36/48/60 months. 2004-05-04 to 2004-07-06
|
| Are Aftermarket Soft Tops any Quieter? | 15 May 2004 01:39 GMT | 7 |
I do love my '00 Sahara but I do a lot of highway driving and rumble and flutter from the soft top drives me nuts. Even ear plugs don't help much. I heard that Jeep introduced a lined top in '01 but I was wondering if any of the aftermarket tops any quieter?
|
| preventative maintenance? | 14 May 2004 23:37 GMT | 2 |
Ok, I have the oil pan off of my jeep again (86 cj7, 258, 88,000 miles). I am wondering if it would be worth the cost of a new oil pump while I have it open? My oil pressure seems about right with what others have out of the 258 -- 20 pounds idle, warm. Also, how much, is too ...
|
| Clogged PCV tube | 14 May 2004 22:41 GMT | 12 |
Took advantage of the nice weather to finally replace my PCV tubes and hoses on my '95 GC Limited (143K miles). Just as I thought......99% clogged! I took a deep breath and blew on the tube and could barely feel an airstream coming through the other end - of course, a much weaker ...
|
| exhaust question | 14 May 2004 22:40 GMT | 3 |
I have an 89YJ 4.2L. If I pull the catalytic converter off, do I have to be concerned about any sensors or anything? Thanks
|
| OT Kill them all. | 14 May 2004 22:37 GMT | 22 |
"Find out who they are. Kill them all. Kill their wives. Kill their children.
|
| Where to jack my jeep | 14 May 2004 20:58 GMT | 7 |
I've seen several posts in this NG, and have come across some other sites that suggest NOT to jack your jeep up with a floor jack under the axle tubes. Likewise, not to jack up your jeep under the pumpkins (whether in the front or back)
|
| steering columns- cherokee to wrangler? | 14 May 2004 20:02 GMT | 27 |
The adjustable steering column in my wrangler is very loose; sloppy down in the pivot, the joint. I am worried that it may come apart some day when driving. I've had the steering wheel come off a car when driving (long, long ago
|