I'm rebuilding a 86 CJ7 and I'm trying to figure out how the trans
stabilizer goes back in, the original one was ripped of in a roll over so I
have nothing to compare to.  I have a stud and two bushings does anybody
know how this goes back in

Need to replace some parts. Thanks for any help.
1) The front steering/suspension damper (Looks like a shock absorber). It is
leaking fluid. Should the tires be on the ground or suspended before
changing this part out?

I was looking to beef up my shackles from the stock crap that my YJ
has. I have a question ........
Would going with a shackle that was 1" or 2" inches taller cause any
problems?

Toledo working overtime:
  http://tinyurl.com/2j3wt
Make friends with a DC employee to get a discount.
Steve

From the multiple cracked wires under my hood, it is time to replace the
wires for my '83 CJ-7, 258.  I am no electrician but I can follow a map and
in my younger days loved to install stereos, equalizers, amplifiers and
speakers.  I could use some feedback on the level of ...

Man, I'd love to put a diesel engine in front of that sweet 4-speed
automatic transmission. That would be the best Jeep ever.
B

Calif strikes again.....
They went after kit cars.... 1st
http://www.caag.state.ca.us/newsalerts/2004/04-042.htm
Brian

We are putting it into a 68 Jeepster with a T-400 trans, with all MPI
systems.
I intend to install an O2 sensor simulator to replace the 3rd O2 sensor,
after the Cat that won't be there.

I've instaled a hitch on my 2003 Liberty and was hoping to find a "plug
in" wiring kit/harness for trailer lights. However the only ones I've found  
run $60-$100. Is that really the price range?

Any recommendations for an online source that mails Jeep Cherokee
spare parts to Asia?
It seems, that everyone is only shipping within USA and Canada, or to
US Army

I would appreciate any and all help anyone could provide me on this
subject. I am doing research for the Mud Racing organization I belong
to, www.swmmra.org. We have a possible member who would like to join
our Stock Class with a CJ-7 running a 360. Our Stock Class rules state

Anyone have any experience with either Rhyno Lining or Line-X spray on
coatings for the interior of your Jeeps.. I've been looking into it
but still not sure about it.. how does it affect road noise.. and how
long is does it last?

Anyone used one of these?  I need some secure storage this summer when the top
comes off for the first time <g>...
-jeff

OK, so I've run into my first problem!
The antenna on this thing is busted.
It's the one-hole ball type with the spring.
It appears to be one complete piece from the mast all the way to where the

While tearing down for my tub swap, I have found two cracks so far.  Do
these warrant a professional or can I do it successfully.  I have read some
previous "frame crack" posts and it sounds like I should "stop-drill" the
cracks, and then use a patch that is welded horizontaly to ...