hey there everybody-finally took my t-176 apart and looked at the gears for
chipped teeth, cracks, etc.  i noticed that all the gears have what looks
like a worn area on the little teeth that sit next to the synchros.  the
gear teeth that are next to this "worn out" area also look ...

Hey All,
About a year ago I got the famous warped rotors at 14K on my 03 TJ
Sport. Even though it was out of warranty, the dealer replaced pads
and rotors. Recently, to no ones' surprise, it happened again (another

Ok, put the new Warn bumper and winch on and took the KC Titaniums off the
bumper. Bought the windshield hinge brackets to remount the off road lights.
Nowhere does anyone give a hint at wiring options. All the pictures I've
found show the lights on the brackets but NO wires.. nice ...

Well what do you know!!
24 Hours and they sent it no questions asked. my original requests went to
DC Canada, where I live, and was supposed to send it in the first place.
I decided on the US since you all had been successful there.

Thanks for the help with the alarm.  new question
2000 Cherokee 4L I6 47K miles.  I'm getting into single digit mileage
in the city.  Little concerned.
The car didn't run too terribly much this winter (although there was

I just thought I'd share a picture of my FIRST and current Jeep. Also, what
I think is a screaming deal!
I am very new to Jeeps, but I'm loving it. When I first started looking I
came to this and other newsgroups for information and found great value in

I'm about to put my YJ back on the road, but I need to do a few repairs to
it. Main one being the culprit for breaking it in the first place - drive
line angle.
My lift was home made by creating longer shackles. I figure I have 3 options

Anywhere besides the dealer I can get the tube that screws into the
passenger side of the pump that connects to the hose connecting to the
heater core? Mine developed a small hole during disassembly. ;-) Online
sources are okay if you know of one. The ones I checked don't seem to ...

I saw this in another group..
http://www.angelfire.com/nc2/mycoffeecan/page1.html

I need a pair of leaf spring plates to fit a rear Dana 44 for an XJ
(spring over). None of the local dealerships or parts places has them
and I haven't been able to find any in the salvage yards. Can anyone
point me to a source?

Hey everybody.
A friend and I went to look at a Jeep today that he's thinking of buying.  I
already own an 88YJ.  The Jeep's owner wasn't there, so we couldn't ask many
questions, the guys dad just told us to go look at it in the back yard.

Looking for a block off plate for my Dana 35 on my 1994 Wrangler.  I got rid of
all the vacumn garbage and went with a TJ shaft and was wondering if anyone
knows of anyone that sells just the block off plate for where the vacumn
actuator was before the install.  I can make on, but ...

Okay. We got the new hubs on yesterady and torqued those nuts to 175 pond
feet. Now I have another request. I currently have the stock fan clutch of
which I hear will not kick in until 210 +. I want one that will kick in at
165 degrees. Doe anyone know where I can buy one. It seems ...

Hello, it's spring and Mango Mel has come out of the woodwork.  Last year
the bolts on the windshield hinges froze - the ones that you need when you
take off the doors and put on a mirror to be legal.
Several people including a Jeep builder tried to loosen them and succeeded

I always put 303 protectant on my old top . I am not sure if it is safe to put
on my new sailcloth top.  Thanks   Rick