i've got a 94 wrangler, and i got to thinking.... instead of the lame
carpeting inside, has anyone tried talking to a place that does spray-on
bed liners for trucks?  i want to spray the inside with the spray-on
liner(like rhino truck-bed liner)so i don't have to worry about water ...

Guys,
I'm back with another question. I acquired a 1983 cj 7 with a 4.2 liter CA
Emissions. I am in the process of repairing the much butchered wiring. it
looks like the harness got melted to the manifold from being over exposed to

ok got the electrical part fixed now it turns over and starts just wont stay
started
any suggestions
thank you so much

I know my system is clogged because I'm getting oil in my air cleaner
(one of those not-so-great K&N air filters). Can you pop out the CCV
fittings from the valve cover without removing the valve cover? What's the best
way to clean out the fittings/hoses in the CCV system?

Brand new CJ-style dash panel, with mounting, speaker holes and glove box
cover, no gauge or steering column holes, in shipping primer.  Came with
my repop tub but I used my original dash.  I'll be glad to send it to a
good home for the cost of shipping, otherwise it's off to the ...

I Pulled out the stick shift yesterday and on the end of it was a milky
white fluid.  NOT GOOD!!!!!  I am going to change out the fluid today or
tomorrow.
My question is......

Hey folks I was wondering if anyone has done the "Flat Fender" mod to
their YJ?
http://www.4x4wire.com/jeep/tech/body/flatfender_yj/
http://www.jeepaholics.com/rides/view.asp?id=1523

I just purchased a set of 2 piece soft superdoors from quadratec. I have the
factory soft top and had the full height steel doors on my 99 tj. I think I
adjusted them correctly so they seal pretty tight, but when driving above 55 or
60, they tops of the doors flap open and shut. It ...

Hey all i have a 97 wrangler sahara that came standard with the 30"
wheel package and i was wondering what axle and gearing it has.  Im
almost sure its a dana 35 but the tag on the left rear reads 3.55
gears.  I do not have any factory limited slips or anything so im

I picked up a used 93 Wrangler and have been going thru all the
recalls that were ever issued. Does anyone know whether I can still
get those recalls honored at the dealer or how I can find out whether
the recalls were ever performed on my vehicle?

My drivers door sags and caused metal fatigue on door end where latch bolts
to door.I fabbed up a cover plate to strengthen the damaged area.Door is
approx.1/4" low are there any fixes that might help to lift door back to
original position???? None of the other doors sag or have any ...

Has anyone heard anything regarding whether or not the Rescue is going into
production or not?  I'm very interested, and any info would be appreciated.
Thanks!

which is the best way to vent my axles for water wheeling , and best sealent
for diff.caps.      since i'm changing my oil for royle perple.it gets
pretty pricy.

  Just wondering if anyone would happen to know what other ECU is
compatible with an 87 Wagoneer with a 4.0 and a 4sp Auto tranny. Any replys
or links would be great.... Many Thanks
                 Kelly

I was bouncing either to having an x-liner install or a Rhino liner
installed.  I have had both done in my pick ups but when I was quoted the
price I vapor locked $450.00 and they would not give me a break even if I
removed the interior.