| Thread | Last Post | Replies |
|
| Another moving question about rust protection. | 22 May 2004 01:43 GMT | 8 |
When I get to RI I want my CJ to maintain its rust-free status. Anyone have any suggestions what to use and your experiences with same.
|
| YJ Axle Seal | 21 May 2004 22:47 GMT | 24 |
My son and I replaced the front passenger side outer axle seal on his 93 YJ the other day and it is still leaking, actually it seems to leak worse. I pulled the vac disconnect cover plate and checked and the seal seems to be still seated properly so I got to thinking it might
|
| Gas... Stick it to 'em | 21 May 2004 21:52 GMT | 58 |
DO NOT BUY GAS!!!! MAY 19, 2004
> IT HAS BEEN CALCULATED THAT IF EVERYONE IN CANADA DID NOT |
| LuK RepSet PRO GOLD SERIES Clutches - Opinions? | 21 May 2004 19:38 GMT | 3 |
Howdy Folks Trying to decide if I wanna fork out the extra 100 bucks for the Pro series LuK clutch for my 96 XJ with 107k miles on it. Getting some slippage first through third, and first is getting a bit difficult to
|
| Jeep Wrangler TJ Regearing Questions | 21 May 2004 19:29 GMT | 4 |
Hey all im fairly new to jeepin and i have 31" tires and the rubicon express 2" bugdet boost and its excellent. However, i plan to add a 1 or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7 american racing rims. However, i have the stock dana 35 rear with the
|
| Finally made it... | 21 May 2004 19:21 GMT | 8 |
Well, my 1998 Cherokee finally made it to an important milestone: http://home.wi.rr.com/jsevey/images/cherokee.jpg Yeah, I know it's not a real big deal, but I've never kept a vehicle long enough to see this before.
|
| Quik Disconnects | 21 May 2004 19:02 GMT | 20 |
One of my next purchases is gonna be quick disconnects..... Are quick disconnects... all the same... some better for some reason.... What's the deal?? opinions please
|
| timing question | 21 May 2004 18:51 GMT | 3 |
i recently tuned up my 73 cj5. according to the manual, the timing is supposed to be set at 3 degrees. the vehicle feels a little sluggish. i have a 258 with a 2 bbl weber carb. plus, i am over 5k feet. do i need to make adjustments for the altitude or the carb?
|
| Wrangler 2000 back door? | 21 May 2004 16:26 GMT | 1 |
The back door on this jeep has become very hard to open and close. I've used different kinds of oils...but it isnt any better. Anyone else had this problem?
|
| Buildup on Rotor | 21 May 2004 16:11 GMT | 5 |
Yesterday I decided to clean my distrbutor on my 4.0. When I took off the dist. cap I noticed some build up on the rotor. It looked like someone did a really bad mini welding job along the edge of the tip. It cleaned right up, no problem. But I was wondering if this is normal
|
| Intermitten Electrical Problems | 21 May 2004 16:10 GMT | 2 |
Just noticed a few problems the other day that might be related to one another. The passenger's side power window, when you get in the car and crank it up for the first time, doesn't work. Usually if I click on the window lock and
|
| questions about oil pressure | 21 May 2004 15:51 GMT | 2 |
Hi all. My '76 CJ5 with 304 has been showing low oil pressure on the little aftermarket gauge that was installed on it when I bought it. When I first start it up and it's cold it will idle at about 800-900 RPM and read about 60 psi of oil pressure. As it warms up for 4-5
|
| Questions about tops, warrantee and fluids. | 21 May 2004 15:24 GMT | 1 |
Where is a good place on-line to buy a bikini top for an '04 Rubi? How much should I pay? What sort of warrantee should I expect from my dealer? Is this a haggle point?
|
| [ot] I won a toy! | 21 May 2004 12:08 GMT | 14 |
Not Jeep related unless you count being able to test things. The story: Last week I was in DC for TechNet 2004. Large gathering and display of tech companies plus some real good speakers of
|
| Cherokee: Rear lock is loose | 21 May 2004 10:11 GMT | 3 |
The lock on the rear hatch of my 2000 Cherokee is loose. Any idea of how easy it is to fix? Can I do it myself?
|