I'm attemtping to changing my evaporator on my 1998 4.0 4x4 Grand Jeep
Cherokee.  Does anyone have the process to remove the evaporator and
install the new one?
thanks for the help

This is for Johnny, who for some reason I couldn't reply to.
It's a 1993 Grand Cherokee ltd.
On a related note; what model years share the same body style to allow for
part searching.  I need a grill and fog lights for the thing.

I have a 1990 Jeep Cherokee with 210,000 miles on it. It still runs
fine, although it's obviously not as quick as it once was. And that's
where my questions comes in.  Where can I find out the approximate
0-60 MPH times on a similar Jeep Cherokee, 2-wheel drive, 4-door with

Okay here we go again with this Jeep. It seems like this is a vehicle that
"always" needs something. Now we have a new problem and I think I know where
the problem lies I just want to verify it and then ask how hard of a job is
it.

Hello all. I recently had a Pro Comp Stage II 4 inch suspension lift
installed on my 1997 Wrangler. Now, when I accelerate, I feel a
bumping noise underneath my feet. It only happens upon innitial
acceleration and is worse when on an incline. I took it to my local

A few questions. Naturally, I wish this was a take out-drop in situation
like old GM cars, but I realize that I will have a few things to consider
before I go from my 4 cylinder to a chevy 350 into a 84 CJ7.
Right off, I want to know if there is a realitvly thorough guide for this

Traded my 91yj for a 2004 sport.  Are the seat covers water resistant or do
I need to do something to protect them?
thanks

Ok Bill, did anyone post this yet.
Too funny, you have to look through the Day1, Day 2 pictures to get a good
laugh
http://www.pbase.com/pupko/hummer

Hey Everyone,
 Right now the Scrambler is using an AMC 360, backed by a 727 and Dana 300.  I
like it, but the 3-speed is killing me on gas.  A friend of mine recently
trashed his Mustang.  It has a fuel-injected 5.0 stroked to 347 and a T-5. I

hi group
i have a 91 yj w/ I6 and the following probs:
the needle in the water temp gauge sometimes would for no apparent reason
jump to the far right (highest reading) as far as it can go and stay

I just found this group a few days ago and have already gotten some good
answers to questions.  I would just like to thank anyone who has taken the
time to answer my questions.
Does anyone know of a good website for new motors for my Cherokee, and also

I am getting ready to install a t-case drop kit and had a quick installation
question.
On each side of the crossmember there is a stud and bolt holding the
crossmember up.  The question is, will that stud come out so I can replace

I know this topic has probably been discussed to death.  But I am in New
Zealand and the choices for finding parts/kits locally are very slim.  I
can import stuff, but don't really want to pay for the international
freight, importation taxes and not applicable warranties. So, I was

Good afternoon,
     A few days ago I received a letter from Chrysler stating that due
to a high demand for the 2000 Cherokees they are offering me a great
deal on trading mine in for a 2004 of any of their models.  Was just