Figured I'd tap the Great Fountain of Knowledge I've always found here at
RAMJ+W for this one.
2 weeks ago my car, a '97 Subaru, got pummeled by hail here in Colorado.
Luckily, the Rigg was under cover getting some work done, phew.  The car is

OK. I'm tired of my damn choke not choking anymore.  Time to put in a
manual choke.  Are these easy to install?  Will any manual choke work or
are they specific for a carb?  I'm assuming an autozone-ish store
carries them?

OBH Ladies Run
http://jbjeep.terahex.com/04ladiesrun/2004ladiesrun.html
------
CalRocs "Rumble in the Rocks" - Goldendale, WA

The Only Book of its type,Useful for older swaps
Surprisingly, this text by Paul Dempsey-whose other works for the
often-dismal TAB imprint are actually very good-is the only extant
text on installing a diesel engine in an automobile or light truck

I stood in a bookstore yesterday evening and read through a special edition
of Consumer Reports which presented overviews of many vehicles, including
the Jeep Grand Cherokee, which they placed on a "do not buy" list because of
long term unfavorable reports.

When the clutch push rod rushes on the fork, how is it supposed to
connect TO the fork. Mine has two holes in it and the push rod goes
right through. Aren't I supposed to have some kind of "shoe" or dimpled
dish-like thing in the fork for the rod to push on?

What name have you given your Jeep?
-Muuurgh

I'm thinking about swapping my half doors for full doors.  The guy I'm
swapping with has a '99 TJ, I have a '98.  I am already planning on
re-painting the outside of the door, but I'm unsure of how the inside
will look.

I have an 86 jeep Cherokee with a 2.5 TBI motor, it idles at about 2000 rpm
once it gets warm, unless I use the motor to slow down the engine, then it
will stay at about 1100. I cannot according to the sticker under the hood
adjust the idle. Any Ideas about what I should look for?

I have a 93yj with the d35 rear end.  I bought a used no-slip for the d35
but it turns out it didn't fit my carrier.  The person who sold it to me
gave me the carrier out of his 93xj with d35.  I want to get it installed
but the costs so far has been killing me...Now I'm looking at ...

I am not sure if this is appropriate newsgroup to be posting questions
on a car.
I have 1999 Cherokee Jeep Sport and I haven't changed tire for past 4
years. I still have some treads left

Looking for a 1971 Jeepster Commando body.
If you know where I can find one, or, if you have
one for sale, please let me know.
Thank you.

Any reason that these tires suck?
I want a fairly aggressive tire for mostly street and some offroad driving, to
include mud and wet snow  in Western Oregon and rocky stuff in Central Oregon.
However, I am not a recreational mudder and don't want or need true mud tires;

frame mount to remove the tension on it?
I have to get the bar off so I can drill a new hole to compinstate for the
lift and eliminate the bump steer.
Any advice would be apreicated

Anybody got pics of their jeep with 32x11.5x15 on it.
I am looking at wheels with 3.75 to 4" backspacing and want to see what they
will look like in real life,preferably on a 2" lift,(That is what I am
doing)