A friend has a 98 TJ that has a badly blown input seal in his PS box.
He doesn't know what he should be using for fluid so has been putting
ATF in it since he changed the seal a couple years ago.
The seal repair has failed and I am wondering if he should be getting a

While shopping for a intake for my jeep I keep seeing this info along with
the edelbrock ads: Dual Plane, single four barrel - off idle to 4000 RPM
What exactly does the dual plane and the rpm range mean?

Would like to lift a 88 YJ Wrangler 2/3 inches. Any suggestions on kits?
Also need a soft top. Is Bestop a good brand. Seem to see them adv the
most...
THX

can i put ant seat in my jeep as long as it fits on the slider any
suggestions

So I've seen a lot of Jeeps (and other vehicles) where people have attached
diamond plate to the body (usually to cover up rust spots).  I'd like to do
something like this to my Jeep (cheaper than replacing the body) but I
wouldn't know where to begin.  I was thinking about that ...

saw this thought someone might be interested
Jeep parts--set of stock wide track axles for CJ7(no housing)/set of stock
narrow track axles w/ housing/ T-5 5spd trans--needs rebuild,but has good
casing and the adapter for the d300 t-case. Make offer. I'll give away the

Did some rock crawling near Nictaux River NS on the weekend. Rode with
some heavily modified rigs including a YJ, an MJ, and a hardcore custom
job. Met up with a group of Suzukis in the afternoon. My moderately
lifted XJ kept up with the big rigs like a champ, but in a momentary

Hey folks,
   Noobie here, but here goes. Got an '00 Grand Cherokee Laredo and have
had continuous warping rotor issues, both front and rear. Must have had
these things replaced or machined at least a dozen times on the front and

I have a 97 Wrangler Sahara 4.0 with a d35c, 3.55 gears, and an open
differential in the rear.  How can i tell if i have ABS?  Ive never
felt it kick in ever in the winter, so im guessing i dont have it.
Other than feeling it while im driving, is there another way to see if

You may remember way back in August of 2002 when I first bought my Jeep,
I was asking a lot of questions on how to restore the color of the
fiberglass.  Well the last two years I have tried using a extra strength
boat polish which would end up looking spotty, take half a day to ...

Okay.  I know I have a "Check Engine" code of 122 (Throttle position sensor
voltage low), but I'm not sure what to do about it.
Any suggestions?
Thanks in advance!

Maybe some of you have an idea what this is ?
My 96 Grand Cherokee has 180K miles on it.
Recently (on 2 occasions) while on the highway, I noticed a decent
amount of smoke in my rear view mirror.  I had the AC on.  The first

My old vacuum shift motor has failed I was wondering if anyone has replaced
it with a 4x2 Posi-Lok. If so is it worth the $200 price tag?  Does it use
the factory 4wd light on the dash? Can I remove the vacuum lines coming off
the transfer case once it is installed?

I have a 1990 YJ.  In the past month the steering column makes a grinding
noise, and though it sounds like it is near the steering wheel, I know it
probably is not.
Also, turning to the left and right is a bit harder - like the Power

Im thinking on shacklelift 1 1/4", how will this affect the jeeps handlin on
the road, its a everyday driver. As u know its a cheap lift and rather easy
to do yourself, right?