I've decided I'm not a "Jeep guy."  After about a year of owning my
'76 CJ5 I've decided to sell it.  It's got a 304 with 3-speed manual
transmission in it.  Ramsey 8000 lb winch.  Edelbrock performer
intake, Holley 670 Avenger carb.  3" body lift.  DUI ignition sy$tem.

 Are the U bolt upgrade from the strap type made of anything special, or
can I just go get the right size stainless U bolts at the local lumber yard?
 Also does a LockRight locker require the limited slip additive?

What tool can I use to cut a 1962 Willys CJ5 frame?  I have a small Porter
Cable 2HP 6 Gallon compressor.  Also, I have a nice sawzall, but don't
think that will work...haven't tried it though.  How about a die grinder
attached to my compressor?  I don't need a nice cut, just a cut. ...

Hey All,
Finally broke down & bought a car. It's a '98 Wrangler and its a lot
of fun but I dont know the first thing about cars. Where is a good
starting place to learn more about cars & particularly this model?

I want to fabricate a custom cargo net and wonder if there is a
supplier of raw netting material - no hems or mounts or borders. I
don't want the crappy stamped fabric "tailgate net" sold in discount
auto parts stores - I prefer sewed nylon webbing or similar.

This is, I guess, part question (as someone suggested I do a few weeks
back when I first posted) and part "weeeeee!" post. Finally found some
public land around here where I could take my new (to me) 98 TJ out
and get it dirty. I remember my old man taking me out off-roading with

Warning: The following link goes to a website that features some content of
an adult nature. Do NOT click it if you are liable to be offended. you have
been warned.
http://www.orsm.net/php/shiteme.php?count=851&folder=../shite

has anyone else had problems with this board last couple of days

I was finding my TJ hard on gas. The local dealer said to purge the
injectors and clean the throttle body.
Here's my numbers after the first tank post the operation
18.2 MPG (US)

I hope this generates a lot of feedback.
I just bought (last Saturday) a 2001 Jeep XJ (auto trans). I traded a 2000
GMC Z71 for this vehicle.
I know that it is unfair to compare the two vehicles but I don't have

The Jeep 258 motor holds 5 quarts or, 6 with filter change.  However, there
is no way the tiny Jeep filter holds a full quart -- maybe 1/2, if that.
When I change the oil and filter and add 6 quarts, the oil level is above
the fill mark.  So I am thinking of going with 5 1/2 quarts ...

Well..I am posting this because of alot of people have asked about changing
the CAT out on their Jeep.  I changed my CAT today.. It was easy.. And alot
cheaper then going to Midas.. Took a buddy and myself about two hours to
change out.. Taking the old one off was what took the ...

I am considering selling my pickup that I primarily use for plowing
and lumber yard runs.  Can anyone recommend a plow for my 2003
Wrangler?  Also a good trailer?  I am thinking of an aluminum trailer,
I would like to be able to carry some firewood when the situation

Jeep Cherokee Laredo 88mod, 6syl.Automatic 4L
Somethimes, even if the car is hot, it start with a very high RPM, and it
stays there until I kick the gas pedal down.
Could this have something to do with the choke ? and what should I check ?

I flat tow my CJ behind my RV. Right now I have to pull the driveshaft and
disconnect the battery so I can turn on the ignition key to unlock the
steering column. I'm going to modify the D300 so I can flat tow with out
removing the driveshaft, but I don't know how to mod the ...