Subject Vehicle 1978 CJ-7, 258 inline six, Carter yf carb
PROBLEM with EGR setup
-----------------------
CJ runs fine when it's engine is cold since the CTO stops vacuum to

Hi!! I recently had my titties enlarged and am really proud of my new knockers, feel free to have a look, ive zipped some before and after pics here for you to enjoy as much as i am.
http://www.theparadise.x-y.net/BoobJob.zip
jkckpxtrukmnvvqsjgznsfdklcmjrh

Bill,
I am completing the rehab of my '46 Bantam BT3C trailer, and need to replace
the bearings, races, oil seals and flange gaskets on the axle.  It is a full
floater which I believe uses parts interchangable with the Spicer 23 rear axle

I'm upgrading to a larger welder for my CJ7 project and have put my little
crapsman wire feed on ebay. If you're interested:  http://tinyurl.com/6fl3j
---or----
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3827643991&ssPageName=STRK:MESE:IT

a friend, (a woman) was given a '97 wrangler. It looks great!  4-inch lift,
(the Jeep) great after market wheels, some diamond plate in the right
places, neat grill, etc, etc. UNfortunately, it is a 4-cylinder, and has
31-inch tires, and the original axle ratios.  The poor thing ...

We are upgrading the tires on our '01 TJ to 31-10.5x15 BFG AT KOs on
Rock Crawler 15x8" with 4" or 4.5" backspacing (still trying to decide
how much -- I doubt we'll ever go larger than 33/11.5s)
We'll have our 5 15x8 Canyon rims with the original Goodyear 30-9.5x15

http://www.motortrendautoshows.com/concepts/commander.html
The Jeep Commander is a combination of the industry's most advanced
powertrain with one of the fastest growing market segments - the SUV. The
Commander uses fuel cells to generate electricity to power two EPIC minivan

Hello folks. Thanks again to all of you for helping me through my 4 inch
suspension lift issues. ;-) My new driveshaft and slip yoke conversion kit are
on the way. I was told that I will need adjustable rear control arms to help
the pinion angle. What kind should I get? Should I get ...

I was thinking of getting one of the Omix Ada Gas Hatch covers, The Black
powder coated one. I have a locking gas cap and thought a hatch cover may
help protect the key Hole from stuff getting in there.
I was looking at the picture of them and it is hard to tell how good they

My wranglers left side front camber reading is -1.4,supposed to be -.09 with
a range of .4.  Other side is normal at -0.8
I need to know how bad this is going to affect the inside tire wear?
All other specs are within range.

http://www.rockcrawler.com/features/newsshorts/04january/naias/jeep_rescue/index.asp
If you could get one minus the auto show foofooraw (camera on the
transfer case), would you buy one?
I would in a heartbeat.

A budy of mine is looking for a stock Dana 44 rear axle for his TJ... 3.73
or 3.07 R&P with stock track lock.
Any of you guys still have a decent one? I have a container waiting in New
Hampshire on which I can ship it to Belgium.

I want to change out the old standard CJ rear bench with a fold and tumble.
What is the difference between the CJ, YJ, and TJ rear fold n'tumble rear
seats?

I have a brand new, never installed original-style Mopar soft top for
a CJ-7 or early Wrangler. Spice color. Zip out windows. All hardware,
fabric parts and instructions included. It's the kind made for full
hard doors (rounded corners). Made by Bestop. The only bad thing is

Jeep Cherokee Laredo 88mod, 6syl.Automatic 4L
The AC is not blowing cold air, anything I can do ?
What should I check ?
Thanks for all advice.