| Thread | Last Post | Replies |
|
| AWESOME! Faces of Death Movie for Halloween! | 18 Oct 2004 04:32 GMT | 1 |
This is the Best Video You Can Buy for Your Halloween Party! Extremely Rare! Banned in 46 Countries! For the uninitiated, the original Faces of Death is by far the most controversial film to date. It is extremely graphic in nature, and most
|
| 2005 Sahara gone? | 18 Oct 2004 04:22 GMT | 11 |
I was just researching another topic when I see that the Sahara is not available for 2005. Is this the case, or am I missing something?
 Signature JimG
|
| Need a Radio | 17 Oct 2004 23:12 GMT | 1 |
I'm going to put a radio in my '76. It came with one mounted under the dash that was in the way so I removed it. I'm not sure why but, it appears that there is not sufficient room to put a normal radio in the normal location. Am I missing something here? One of the ducts for ...
|
| Alternative defrost vent duct | 17 Oct 2004 20:51 GMT | 13 |
I pulled my stock duct out which vents to my defrost on my 83 CJ7 in order to put in an aftermarket guage. Due to the guage's depth into the dash, the old duct is just too fat and bulky to work anymore. Anyone have any alternatives that I might be able to use in the old duct's ...
|
| 1999 jeep cherokee sport problem | 17 Oct 2004 20:21 GMT | 1 |
while driving the above subject the service eng lamp comes on and the air bag light comes on and my speed, rpm and other panel instrument do not work. after about three minutes the service eng light goes off and the airbag light goes off and all instrument gages return to normal.
|
| PEARCE-SIMPSON 23channel CB radio w/antenna-ebay-$25 | 17 Oct 2004 18:42 GMT | 10 |
this needs a new mic, but works fine with a good mic- tested and it works http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=5725073516&ssPageName=ST RK:MESE:IT
|
| TJ oil pressure | 17 Oct 2004 18:25 GMT | 4 |
In my 01 tj my oil pressure sits at 40 on the dial It's a manual I got in a 00 tj and the oil pressure was only half that. It's an automatic.
|
| real jeep link for bill H | 17 Oct 2004 17:08 GMT | 3 |
hows this for a real jeep http://www.aev-conversions.com/ goto hemi section Bill :)
|
| Engine miss problem resovled | 17 Oct 2004 04:35 GMT | 1 |
Mike, Bill, Thanks for all your help. Turns out Mike was the closest with his pinched wiring suggestion. Turns out that one of my wire ties had broken free at some point, and the harness was sitting on the exhaust manifold. The
|
| Difference between Mickey Thompson Classic II and U.S. Wheels Baja 751 | 17 Oct 2004 03:45 GMT | 1 |
Hi, I need some help on this matter. I want to buy the Classic II wheels from Mickey Thompson and my supplier told me that the Baja 751 from US Wheels are the same wheels only with a different brand...
|
| Gears and Speedo | 17 Oct 2004 00:08 GMT | 9 |
Anyone know of a link (or formula) to calculate the speedo gear needed ... I have swapped in a Ford 8.8 with 4.56 gears into a 99TJ (was 3.73) and running 33 inch BFG's (35's later). Thanks
|
| Go to MOPAR for a serpentine belt...? | 16 Oct 2004 17:27 GMT | 18 |
I am going to get a spare serpentine belt before my big elk hunting trip in a couple weeks here. Should I go to the dealer, or get one from an auto parts store? I'm happy to pay more FOR MORE QUALITY. Just want to make sure that's the case with these belts.
|
| Custom Spare Tire Cover | 16 Oct 2004 16:45 GMT | 5 |
I'm looking to purchase a vinyl (?) spare tire cover for my '04 Ruby. I want to have a photo put on the cover. I've done a search and found a couple of places, but is there a material that is better? Has anyone had good or bad experience with any of the custom tire companies? Any ...
|
| TJ Radiator | 16 Oct 2004 16:30 GMT | 8 |
Need recommendations for a new radiator for my 2KTJ. I would like to upgrade for a future HP increase. Any practical experiences shared are most welcome. Thanks -Allen
|
| Slight steering shake on the bumps | 16 Oct 2004 12:28 GMT | 8 |
Firstly, I seem to have developed a slight shake in the steering as I go over bumps in the road. So I thought the steering dampner might be on its way out. I had a look and noticed slight oil seepage around the ends of the dampner. Does that confirm that indeed the dampner is ...
|