00 Cherokee,4WD    front rotor is frozen on.  Soaked it with  WD-40 and banged
it with a hammer. Wont release.  I dont want to damage the hub by repeated
hitting.  Whats the best way to get this off.  Do they make a puller?
                    Thanks

('89 Cherokee pioneer 4.0L) I have that "Power/Comfort" button for the
transmission (on the dash next to the rear wiper button) It works
intermittently I am wondering if it is the switch itself or a module under
the dash?

A friend owns an 89 Wagoneer with a bad headlight switch (rocker type). Do
we need to take apart the entire dash to replace it? If we do, can someone
give us a few hints as to how to accomplish this? We can't seem to locate
any screws holding the dash in. I know the Haynes manual ...

I have posted the 2004 United Four Wheel Drive Association Marketing Survey to the
following web site in two different formats.  
http://www.xws.com/jbjeep/UFWDA%20survey2004.doc  (MS Word document)
http://www.xws.com/jbjeep/UFWDA%20survey2004.html  (html document - for the MS Word

My Jeep pulled a new trick on me yesterday when the clutch is in the thing
stays idled to high. Could this be the tps sensor and does it hurt to
drive it? Its a 6cyl. 4wd 5 speed. Were working 6 day weeks right now so I
have to drive it and finding a Jeep mechanic around this lil ...

Hello, I am new to jeeps, so please excuse any stupid ?'s
I am in the market for a jeep cj.  Mainly for hunting /offroad.
I found 2 in my price range.
fist one is a 1979 CJ5 6cyl 3 speed 67000 original miles. Interior is nice,

Stinking rough idle will not go away but I think
I've found the problem with the miss after heat-soak.
There is a TSB for putting insulation around the #3
fuel injector.

I have a 89 Wrangler 4.2l that I installed a new CD deck into today.
The installation went without a hitch, except for the fact that the
wires that connect to the LED light for the alarm (LED doesn't work)
broke loose. After hooking everything back up and putting the dash

OK, I have a couple more questions about auxillairy foglights for a
lightbar. Would you guys recommend 8" round or 6" round. I'm not sure I've
ever seen 8" on a lightbar before and they sound pretty big but they are the
same price and I'm wondering if there is any advantages. Also, ...

Hello, Brian of 'Brian's Military Jeeps' here...
and I am selling a pretty rare WWII Jeep Trailer.
Currently $500. Lot's of PICs posted on eBay.
eBay item 2273154143 (Ends Oct-04-04 12:08:45 PDT) - WWII Jeep Trailer - 1945

I'm currently building a site about pimp cars. I am looking for more
pictures of pimped out Hondas. If you are a owner of a cool looking
Honda, and to would like to have a picture of your pimp car on the
site, please visit http://www.pimpoutmycar.com and mail your picture.

Posting this for a friend.... Bill you must have a site for RPM tires vs
gearing??
Thanks in advance!
Jeff

I have a 99 Grand Cherokee Laredo.  Yesterday, while starting the car, it
started shaking violently. I turned it off, I restarted it, it continued
shaking for a 20 second period and after that the shaking went away. The
problem is that the Check Engine light came on and it never ...

My seatbelt buckles will not lock and I would like to repace them, has
anyone done this, and if so, what parts do I need?
Thanks,
Mike

M-I-C-K-E-Y  M-O-U-S-E  about sums up this gawkey looking p.o.s.  From the
back it looks much like an Aztec...the gas tank hangs down below the
driver's seat..(duhh)  ..it has the same 2 cast iron tuna cans hanging on
the rear end as that other mistake, the liberty has...there area ...