| Thread | Last Post | Replies |
|
| 04 Wrangler Spark Knocking - Dealer says use 93 octane. True? | 27 Oct 2004 18:51 GMT | 30 |
I am new to jeeps. I just bought a Wrangler X with an automatic as my primary commute vehicle. I have a terrible commute to work across two lane mountain roads that takes about an hour and a half every morning. I finally realize that I would not hate the commute so much in a jeep ...
|
| Drove the 05 Grand Cherokee | 27 Oct 2004 15:12 GMT | 3 |
I sell Jeeps, use to be a member of this forum years ago when I had my TJ, friends and I started Baystate Jeepers (www.baystatejeepers.com)....so here I am, thought I'd chime in... We just got the 05 Grand Cherokees in, didn't care for them in the
|
| Hard Top Wiring....Something ain't Right | 27 Oct 2004 04:05 GMT | 10 |
Just put a Factory hard top on my 2004 TJ and put in the factory wiring kit also. The kit goes in pretty easy but when I reconnected the battery the Rear Defroster switch is on all the time, including with key off!
|
| Stabilizer bar-"link" need to replace? | 27 Oct 2004 02:20 GMT | 5 |
My stabilizer link on the passenger side is broken. My service manual says I need a special tool to fix it. Is it easy to replace it? Can I do it myself?
|
| Looking to learn.... | 27 Oct 2004 02:18 GMT | 9 |
I just purchased a '97 Jeep TJ. One thing that has always bugged me, is quite how inept I am when it comes to under the hood. I would dearly like to remedy that situation, but I don't know where to start. The main reason I feel I know nothing is simply that I haven't ever been ...
|
| Help: Choice of best Battery for 89 CHerokee LTD | 27 Oct 2004 02:11 GMT | 1 |
I have an 89 Cherokee LTD that I've had since new. I've replaced the battery a few times now as a matter of preventative maintenance. I've always felt that the aftermarket choices that I've had were limited, and ended up with what I've felt are 'small' batteries with only about ...
|
| stuck in 4wheel | 27 Oct 2004 00:55 GMT | 1 |
One thing I forgot was the Tranny and T-case are out of an 94 wrangler 47 Willy's 50 willy's truck 87 Wrangler
|
| '88 Jeep AM/FM cassette radio schematic | 27 Oct 2004 00:21 GMT | 5 |
My radio blows the fuse on the back of the radio indicating that there is a defective part in the circuit. I need a schematic to troubleshoot the problem. Can anyone help? TIA,
|
| Hard Starting - 1990 Cherokee | 27 Oct 2004 00:17 GMT | 12 |
A good buddy recently bought a 1990 Cherokee Limited with the 4.0 litre inline 6. Every time he tries to start it after it's sat for awhile it takes a looong time to finally fire. Time is 8-10 seconds. With winter coming, he's
|
| Shift Point Adjustment | 27 Oct 2004 00:12 GMT | 9 |
I've been watching the group for awhile and haven't seem much comment on this, so it's time to ask. I have a new Unlimited that I am enjoying owning very much. The only complaint I have it that the automatic transmission doesn't seem to
|
| NSG370 6 Speed in the new TJ | 27 Oct 2004 00:09 GMT | 1 |
I was looking at the specs for the new TJ with the 6 Speed.. It says that it has a NSG370.. Who is the manufacturer of the 6 speed? The cool thing from what I have read is.. 1st gear is 5.014:1 which is almost like the NV4500.. But I doubt it has the durablility of the NV4500...
|
| Doors Open On New Powder Coating Facility Anaheim California United States | 26 Oct 2004 19:36 GMT | 15 |
20 October 2004 Doors open on new Orange County California United States Powder Coating Facility. The Company Name as our group is D/b/a Powder Coat Professionals. The facility located at
|
| An evil creep wants to steal your jeep ! | 26 Oct 2004 19:00 GMT | 6 |
|
| Starter Motor Troubles | 26 Oct 2004 18:58 GMT | 2 |
My starter motor has shorted. The resistance from the hot lead to ground is something like 0.5 ohms. If I press the contacts on the switch that the solenoid hits, the resistance goes to about 3.5 ohms. I connected the starter (clamped in my vise) with jumper cables to a known
|
| Where to get decent prices on shafts? | 26 Oct 2004 14:55 GMT | 1 |
Hey folks, it seems that I need new front axle shafts on my 98 TJ. Both inners and outers, the ears are wallowed out on the stock shafts (its only taken 6 years). I've been looking at prices and about had a heartattack! Anyone know of a good place (decent deal) to purchase ...
|