Well, a friend just recently sold his 03 WJ with 48K on it.  He got real
disgusted with some all of a sudden issues.  Both rear axle seals went while
he was on vacation.  New seals and breaks no cost under warranty.  Then his
front seals on both axle went some more head aches.  ...

It all started when I smelled gas, a look under the hood revealed some
gas leaking where #1 injector enters the intake. I replaced all o rings
in the rail, it wouldn't start. a depressed shraider valve showed low
pressure in the rail so I replaced the regulator still low pressure ...

89 XJ 2" Skyjacker AAL lift continues..
OK, All four rear shock bolts came out w/o issue! SCORE! Got the passenger
side leaf spring off. The AAL is almost as long as the main leaf, so I
installed it under the main leaf with the three smaller stock leaves below

Would anyone happen to have tail light guard instructions handy?  I
recently bought a pair but the instructions were left out and trying to
get them from the company is a nightmare.  I've been able to take the
tail lights off, but i need to disconnect the wires in order to install

So I pull the hood release on my 84 GW and only the passenger side
releases - any suggestions as to how to get the hood open, and then fix
the hood release mechanism?
JP

Anyone know why Warn is replacing TJ gas tank skid plates?  They contacted
me and were in a big hurry to replace it - at their cost.  Only a mysterious
explanation given.

hi group!
folks! pls help me with this one -
so i'm starting up the jeep this evening first time in the day (meaning it's
dead cold)

Anyone ever put a diesel motor in a Grand Cherokee?  If so, what motor?  How
well did it work?  What tranny was used?     ???????

89 Cherokee (again...).
On the rear shocks, I'm confused which end to mount up. Does the short fat
end go down while the metal shaft and red boot end attach at the top?
http://www.industryfigure.com/berkeley/Jeep/lift/lktrshock1.jpg

OK, I expect to break off every bolt holding the rear shocks on. What do I
need to get to put new ones in? (Perfer to buy the stuff BEFORE, so I'm not
running the store dirty and bloody knuckled...
TIA

OK, crank sensor it was. It starts and runs.  Now that I dumped all sorts of
starting fluids and old gas down the tube to attempt to start my YJ, I think
my injectors are dirty. I get a little "bucking" now and then while driving.
I have to admit, when I took the intake off the ...

Hey group,
 I am experiencing a wobble in the front end of my 86 CJ7. It is slight and
I don't feel it until I hit about 65 mph. I think it's probably a wheel
balance problem but just in case....... What causes the dreaded "Death

Anyone know the difference between 80 and 81, 258 motor around the intake
manifold / head area?  I have seen a few parts like valve covers and
Offenhouser intakes that list 81-86 year models.  The 76-80 years must have
a different head?

Hi, Iam new to the group, I have a 2000 Lincoln navigator and was
wondering if anyone knows the differnece in trim colors?  I am trying
to find a set of captinas chairs for the second row, the ones I found
are from a 1998 Navigator, they are tan and have the interior code of

Well Sunday was the big 50 for me and the wife said she had ordered my
present.  They showed up today a OEM service manual for both the WJ and TJ
on CD.  Also, opened the second box and it is a Digital OBCII code reader I
think I will keep her for another 30 years.