| Thread | Last Post | Replies |
|
| thrust bearing noise | 17 Mar 2005 02:53 GMT | 2 |
ive got a noisie thrust bearing in my cluch, ive only done 32000km in my wrangler is that common?
|
| Its a Jeep Thing | 17 Mar 2005 00:35 GMT | 12 |
well, the wife and i went booniee hoppin saterday found an old mining road that hadnt been used in years, alot of washouts and mougles(spellin) and parts where it had slid down the mounain side, nice slow bumpy ups and downs, all crooked and twisted up.
|
| 597.84 | 16 Mar 2005 23:56 GMT | 7 |
So I'm getting my Altima's brake's done this morning (300.00 with a change in Serp Belt) and I see across the street a Body/Paint shop. So I find out the Altima's going to take longer than I can wait so I hoofed it home and picked up the jeep. On the way back I stopped in the ...
|
| XJ Video with faster link | 16 Mar 2005 22:33 GMT | 3 |
Here, the other link I posted was too slow. Heres a faster one, much faster. The gold XJ was bought for 200 bucks and driven till the wheels fell off, jumping through the air. Look at those control arms torn in half. It actually ran with NO upper control arms and three wheels. ...
|
| Gas Cap vs Chk Eng Lite | 16 Mar 2005 21:05 GMT | 24 |
RE 2002 Jeep Cherokee, 6 Cyl. I had a problem passing the State of NJ emissions test. The guy said it was the gas cap. But, it passed and I happily left. Now, I have a Chk Engine Light. The car runs beautifully. Could this be the gas cap acting up? Is
|
| aircon working OK? | 16 Mar 2005 18:12 GMT | 7 |
Ok, first of my hopefully few stupid questions regarding my new (to me) '97 JC 4.0l... When I turn the aircon on the electric fan runs for between 9-15 seconds, followed by 5 seconds off, depending on the interior cabin
|
| offroadsuperstore in grand rapids mich? | 16 Mar 2005 08:05 GMT | 3 |
was wondering if anyone knows of the name of or how to get ahold of a offroad shop that use to be in grand rapids on or near 28th st?
|
| Where the heak is the flasher module on my 2002 TJ? | 16 Mar 2005 04:43 GMT | 4 |
Its not where the Hanes manual says it should be. I have a 2002 TJ-X. It should be on the right side of the steering column, being held by a bracket but its not there. Theres a guide for a 2000 TJ somewhere online and it shows it in the proper
|
| 1998 Cherokee XJ.. electrical/headlights ? | 16 Mar 2005 04:38 GMT | 10 |
Hey all, Another issue popped up. The headlights work fine, both high and low. But unless you push the switch in to turn off the headlights before I turn the Jeep off, the lights won't go out. If I turn the Jeep off (ignition
|
| Need some help with ft. pass. power window on '01 GC... | 16 Mar 2005 04:36 GMT | 2 |
I had the dealer replace the motor a few months ago on the driver's side. Now..the passenger side isn't working. But, unlike the last incident, the motor seems to run and sound OK in both directions (no "grinding" sound), but it just won't raise or lower the window. Also, the ...
|
| Bearing retainers for 1-piece kit | 16 Mar 2005 02:28 GMT | 7 |
Hey Everyone, I'm replacing the seals and bearings in my CJ8 this week. It's already got a Superior one-piece kit. I have the axles out of the housing, bearings and seals are pulled. I have a friend with a press
|
| how much to ac air conditioning in my 94 jeep wrangler? | 16 Mar 2005 00:42 GMT | 1 |
This year I'm interested in not being a tough guy and getting AC put in my toy. Will it cost be an arm and a leg or just a leg? What does an after market ac setup cost in a ballpark figure? JoJo
|
| OT - Struts | 15 Mar 2005 23:43 GMT | 32 |
I was getting the oil changed in my Saturn at this tire shop and I was told by the Tech that the struts where shot and they were shredding the tires.. I have never heard of that before... Can someone help me on that one? I know it isn't a Jeep question, but I thought that the ...
|
| Speedometer Gear | 15 Mar 2005 20:35 GMT | 5 |
After adding 4.88 gears and 35" tires to a 78 CJ-7, the speedometer is way out of whack. I can find tons of places on the net telling me to change out the speedometer gear, but I have not been able to find a place to buy the actual gear. Does anyone know a place that sells
|
| Any 225 gurus out there? | 15 Mar 2005 17:58 GMT | 24 |
I've got a 225 v-6 with a strange problem- anyone out there well-versed with this motor and wants to offer advice? Thanks, John
|