| Thread | Last Post | Replies |
|
| 90 wranger prob. | 10 Mar 2005 13:26 GMT | 6 |
When I turn off my wrangler, the brake light lights up and stays lit... Any suggestions??? It is a 4.2 5 speed.
|
| FS in NC: Dark Tan upper 1/2 doors | 10 Mar 2005 10:34 GMT | 3 |
Posting for a friend. He bought a complete top kit, and can not use these. They are dark tan upper half doors. He is asking $75 + any shipping. You can email my friend direct at bigreddog6@yahoo.com.
|
| Is my battery shot? | 10 Mar 2005 02:53 GMT | 23 |
I park my CJ in one of those 10'x20' grey plastic garages, was out wheeling last sunday, and obviously I forgot to turn off lights, battery so dead not even a click, stuck camper battery in and on come lights. So question is, had CJ for 1 1/2 years, battery of unknown age, one ...
|
| Turn Signals & Flashers don't work - 99 Grand Cherokee | 10 Mar 2005 02:25 GMT | 2 |
Problem started with Left signal working intermittantly, then quit completely. Now signals and flashers don't work. Changed switch, fuse and flasher, still not working. Is there a relay I'm not finding? Any help would be appreciated.
|
| radiator (?) woes | 10 Mar 2005 01:59 GMT | 6 |
I have an unusual radiator problem with a 99 TJ Sport. It has 73,000 miles now, and at the 60,000 check last year the dealer said the radiator was weeping at the seam. Nothing urgent, so I filed it away in the "later" bin and started checking the coolant more. This weekend I
|
| jeep fender compatibility?? | 10 Mar 2005 01:45 GMT | 8 |
hey guys-not a very techy question here but-i'm in need of a driver's side fender for an 85 cj7. i was wondering if a fender off of an 80 cj would work. do they look the same? same holes? thanks!
|
| Pinion angle... what's the secret? | 09 Mar 2005 22:53 GMT | 18 |
I thought I had my pinion angle adjusted pretty well Sunday when I attached the driveshaft, but I have a vibration that starts at about 40mph, dies off at around 50 and picks up again at about 60. My helper and I held a carpenters square (the big L shaped one) on the diff
|
| does anyone know this? | 09 Mar 2005 22:46 GMT | 8 |
I want to install a new air filter housing on my 258, carter carb. Does anyone know the receiver size? that worded right... in other words, I ditched the emissions crap and want a new air filter housing and im not sure what "size" I need.
|
| Gas leak, caused by? | 09 Mar 2005 22:19 GMT | 3 |
I have been smelling a strong gasoline odor from the vents when I had the A/C on, and then when I popped the hood I see gasoline leaking from the fuel rail (see link to image). I am thinking it is the fuel injector, and dropped in some fuel injector cleaner, seemed to relieve
|
| '88 Jeep Comanchee - Replacing tie rod vs connector rod | 09 Mar 2005 18:44 GMT | 4 |
Something in my steering is allowing more play than it should when turning the wheel, and this morning, when turning into a parking lot, I noticed a small "clunk" as I turned the wheel hard left to hard right. I suspect it's either the tie rod or the connecting rod that needs to ...
|
| emissions crap on an 89YJ | 09 Mar 2005 12:55 GMT | 19 |
I have an 89YJ, 4.2L I'm installing a carb from a 70's CJ and ditching the emissions crap...question is, there are 2 vaccuum solenoids on the firewall above the valve cover and 3 on the valve cover, what are these for and can I ditch
|
| bestop Jeep give away 2004 | 09 Mar 2005 07:41 GMT | 1 |
Is Bestop one of the up and up companies? Remember a 2004 contest where they were going to give away a "restored 1985 Jeep CJ-7 vehicle"? Well the contest ended Dec 31st, there was suppose to be a drawing Jan 11 and a winner would be contacted. Well it is 8 weeks later and ...
|
| Replacing Trans Oil Cooler Line | 09 Mar 2005 01:31 GMT | 3 |
Its late and I'm sure this is an easy question, but its got me stumped. here are a few pictures that will hopefully make my 1,000 words a little more clear: http://home.comcast.net/~1redcreek/jeep/trans/index.htm
|
| 90 YJ, passenger door adjustment, and front driveshaft | 09 Mar 2005 00:33 GMT | 5 |
Got two questions, my passenger door isnt flush, to the body, is there a way to bring it in flush, any "jam" adjusting?
|
| Dana 44 may be bent? | 08 Mar 2005 23:13 GMT | 23 |
I got a used dana44 rear installed into my tj and when I look at it from a distance I notice that the tires have negative camber I think it's called... looks like this: /-\ It looks like its gonna wear my tires unevenly, and I took it to an
|