The TJ design that was introduced in 1997 is well passed the 5-year design
cycle.  Does anyone have any inkling of changes for the 2006 model?
Thanks,
Robert

Where is the best place to install the microwave/radar/field disturbance
sensor?  I have a Tuffy Console and was thinking about putting it inside the
arm rest.  I have heard that under the plastic of the center console was
popular but having steel i'm not guessing it would work.  ...

http://detroit-auto-show.autoblog.com/entry/1234000640026414/
Anybody that can afford it is living in the wrong neighborhood.
-- msosborn at msosborn dot com

Where can I go to purchase guaranteed good quality, new parts for my 83 CJ?
I'm looking for a hood (fiberglass), defroster duct, side mirrors, heater
cable set, glove box, hood tie down's and catches etc.. Many other assorted
parts, mostly dash and under dach parts. I will also be ...

I got it in, finially.. I need to replace the shocks and looking at new
tires and wheels...I am have to replace the u-joints in the driveshaft.. But
it is in!!! Of course.. Here are some pics...
http://www.knology.net/~bmccune/axle/new-axle1.jpg

My power steering pump was leaking - so I replaced all the seals -
reinstalled -bled the pump and now it's not right.  It doesn't leak - but
the steering is tough.
What did I put in wrong?

I have a 1995 4X4 Cherokee and when ever the weather got really cold this
past winter my
auto door locks got very sluggish.  They won't work with my remote at all
and I would

Does anyone know of a good place to find TJ parts on-line.
I'm looking for the weather stripping that goes around the tailgate.
The dealer want $150.00 bucks!
Used is OK as well.

I have a 1988 Jeep Wrangler. It has a 1998 Jeep Cherokee radio in it. I need
to know what year OEM radios will fit what jeeps from 1988 to present. Does
any one know for sure without a doubt?
Thanks

Can I just take out the manual steering box out of my 95 YJ and install a
power steering box? Is it a bolt on item or would I have to switch out the
steering shaft out also... I have done Google searches and can't find that
answer...

I'm curious about the history of the 4.0 engine.  I know it's based on
an engine AMC introduced in 1964 (and powered a bunch of Gremlins a
while later), but at some point AMC (or Nash) took a clean sheet of
paper and designed a new engine that eventually evolved into our

I'm writing for a friend to hopefully, get some ideas about how to go about
finding a solution to his problem.
93 Jeep, not sure of the model (Wagoneer? Town and Country?) 2wd, inline 6,
auto transmission.

well i did it,
i got a set of 2 5/8 gauges for my YJ
why 2 5/8, well for me, there BIG and i can see them,
measuring the exsisting width of the center panel, i had 3.05

Need some instuctions on replacing ex manifold pref w/pictures for 242
4.0 91' wrangler if anyone can steer me.
regards J

I'm looking at 99-01 XJ jeeps with the old body.  Is there anything I should
look for?  Does anyone have anything great or terrible to say about these
rigs?  I'm looking at 4X4 4.0L models only...
Chris