| Thread | Last Post | Replies |
|
| upper & lower ball joints after accident | 23 Apr 2005 17:07 GMT | 2 |
Grrr... hope my insurance company isn't trying to screw me here, so I come here for help. A month ago I was in an accident with my 01 TJ, a guy ran into my rearend and I had to get it replaced with a new one, which is great, but it still
|
| engine mounts | 23 Apr 2005 17:05 GMT | 1 |
any suggestions on repair or replacements? 89yj 4.2L
|
| Steering box leak | 23 Apr 2005 14:40 GMT | 4 |
Can the input shaft seal be replaced without removing to box (my TJ)? Anyone done this?
 Signature JimG
|
| whats the difference | 23 Apr 2005 14:23 GMT | 2 |
morning everyone, just what would the difference be between a 2003 sahara and the rubicon whenever it came out (04?). thanks john jr
|
| Starter interlock question | 23 Apr 2005 13:05 GMT | 26 |
Quick question about an '05 TJL I bought in February. I *loathe* Big Brother demanding that my left foot sit squarely on the clutch pedal before I am allowed to crank the engine. The engine crank bearings and journals don't like it either, no oil pressure being present and all. ...
|
| slight vibration after 2 inch lift | 23 Apr 2005 12:58 GMT | 7 |
I just installed a 2 inch lift, springs and shocks. Everything feels tight, except there is a slight vibration from the rear between 25 and 35 mph during acceleration. Its livable, but is it doing any damage? If so, how can I eliminate it?
|
| Army Jeeps- Highway usage | 23 Apr 2005 06:54 GMT | 24 |
All, I'm considering buying an old army jeep, and fixing it up as a putt around town vehicle. I'm not particularly interested in a completely faithful restoration, at least as far as the internals go, but in
|
| Charging problem 90 XJ | 23 Apr 2005 05:09 GMT | 26 |
My XJ died due to a no charge condition, battery tested good, alt tested bad. Replaced alt, ammeter showed no charge so I checked the fuse links and connections at the.....well I'm not sure what it's called but it has a stud that all the fuse links bolt to and 4 spade
|
| NUTTER BYPASS | 23 Apr 2005 04:58 GMT | 2 |
YES I DID USE CAPS!!! Hey Mike, do you have a link to the Nutter Bypass? I found it once back in Feb but can't seem to locate it now?? Thanks
|
| *How to for a U Joint.....* | 23 Apr 2005 03:44 GMT | 9 |
Hi, changing a front end u joint the right side. 1st time doing this. Before i go ahead start this weekend thought I would ask if anyone has a good "How to" step by step web page or anything else? So I might make quicker,safer work of this task. Although I have help, I have been ...
|
| HOW TO TIGHTEN UP MY CJ FRONT END. TIE ROD, BRACE BOX, WHEEL BEARINGS, STILL A DANCER | 23 Apr 2005 01:22 GMT | 12 |
IN OCTOBER WILL MARK 2 YEARS SINCE I PURCHASED THE JEEP FROM HELL. NEEDLESS TO SAY IT HAS BEEN A TREMENDOUS UNDERTAKING. I BOUGHT IT THINKING THAT I COULD RESTORE IT AND SINCE IT ALREADY HAD THE LIFT, 33X15.50X15 SWAMPER TSL/SX TIRES AND NEW AQUAMAX TRAIL SEATS AND CUSTOM
|
| synthetics | 22 Apr 2005 19:22 GMT | 15 |
I am planning to convert my '05 Wrangler SE to all synthetics at the first oil change. Engine, trans, diffs. What brands of synthetics are recommended for trans and diffs especially?
|
| Jeep CJ 258 Acceleration Issues. Please Help! | 22 Apr 2005 14:00 GMT | 18 |
Hey guys, I have an 84 CJ7 w/ 258 Carter BBD and T-4. It has the TFI upgrade and the Nutter bypass. The motor runs very well at idle and at constant rpm, but when I accelerate it bogs / stalls until the rpms finally catch up w/ it then it runs great. I can put the pedal to the
|
| Vinyl rollbar tape | 22 Apr 2005 13:07 GMT | 17 |
Can anyone direct me to a website where I can order some black 2" vinyl tape, the kind for wrapping roll bars? Good lord, I've gone to about five places locally, including <two> 4WD shops, with no success, and find such a wide price range on the web that it's insane. Has
|
| Fluid Change on XJ | 22 Apr 2005 07:52 GMT | 1 |
OK....I'm taking my 1999 XJ (ltd) in for fluid changes (93K miles, first time for fluid changes). I bought the Jeep at an auction so don't yell at me. I asked for both diff's to have the cover plates taken off and fully cleaned. And for the TC and Tranny to be drained and
|