I've got a '94 YJ and the previous owner had put 31" tires on it. They
do clear but are only about an inch (or so) from hitting the fenders
(flares). I'm using this jeep as a daily driver and most likely wont
have it off road (maybe a trail here or there, I wanted it for going

Hey all,
Last night the right blinker on my '98 TJ starting blinking in some kind of
turbo speed.  I know this usually means you have a light burned out.
I checked all bulbs on the right site and they're all good,  what do I do

I have a '05 Wrangler that came with a hard top.  I just installed the
Bestop Sunrider soft top.  I'm wondering if I have to take off the soft
top hardware when I go to put the hard top back on in the winter..
Thanks!

Well after arguing myself blue with a 'mechanic' that says no way a Jeep
with a carb can pass emissions in California if you disable the
emissions computer or do a 'Nutter' on it after the first guy I think to
put the directions online:

was wondering if anyone had gone to this gathering and could give some feed
back....taking new diesel Liberty that is trail fitted with hooks and
shields underneath.....also can you park an RV vehicle there instead of RV
parks in Amarillo.....thanks for any and all replies...really ...

1997 Jeep Cherokee Sport (purchased used) with 97k on it.  
I get a front end shudder -most of the time but not always-.  When it
happens it's right at 70mph and it stays for as far up as I dare push
it (say 85mph). note I don't say shimmy... the motion is front to rear

Anyone try out Magnaflow Exhaust Cat-Back System. How does it sound? Is it
load when driving at 60?

What type of lubrication should I use on the injector and fuel line Quick
connect O'rings??
Also, I have removed the oil filter adapter to replace the O'rings. Just
for information the adapter bolt was a 16mm and was easy to get to from

I just replaced the plugs and distributer cap and rotor on a 97 Jeep Grand
Cherokee because it was starting hard.  It still starts hard after
replacing those things.  Usually I have to crank it over for a long time
for it to start.  Once it is running it runs and drives great.  If ...

'85 Jeep CJ7 4cyl 2.5L. Fixed the timing chain and reassembled yesterday.
Started up but didn't have a tach so we couldn't set the idle speed and
timing properly. Because the distributor was moved it's way off time (it
should be 12 BTDC and is like 16-20, not to mention the idle ...

I need to find a bikini that I can use on my '99 TJ when I have the
front horizontal sidebars off. I can't find one anywhere. I used to
have a very simple bikini on my '77 CJ-5 and I'd love to have something
similar. After months of searching on the internet and catalogs, it is

FINALLY!!!, after about ten years of waiting I bit the bullet and bought a
2000TJ sport.  While I love the vehicle as it is Jeeps are made, not
bought....so since the purchase on Saturday I have been feverishly hitting
every 4x4 website trying to decide exactly what I want to do.  ...

I have a early 90's YJ, first time I had a soft top, installing this
weekend.
The top has a track installation system, so will this be a quick 5
minute job to cover / uncover during changing weather conditions or

hey all,
have old cj7, 350 + th350.  the tranny is leaking like crazy.  can
someone help me identify 2 nozzles/ports on the casing and their
purpose?

All,
I'm having difficulties re-installing the clutch return spring on my '82
Scrambler.  The spring I'm referring to is the one attached to the clutch
pedal on the inside of the Jeep.  It still needs to be attached to the