| Thread | Last Post | Replies |
|
| clip for headlights 97 zj | 29 May 2005 21:25 GMT | 2 |
does anybody have any idea as to how I can get just the headlight clips for a jeep grand Cherokee 1997. I broke a couple of them and it seems all I can find is the complete headlight assembly. Don't need the entire headlight just the plastic clips. any idea??
|
| I'm gonna go Postal....! | 29 May 2005 19:51 GMT | 6 |
Hey group, I recently acquired a 1981 DJ5L Postal Jeep (stop laughing!!) and the wiring under the dash looks like hell. The number of splices and wire taps under the dash is scary! Not surprisingly, I have electrical issues. Try
|
| Sway bar discos | 29 May 2005 19:05 GMT | 7 |
Looks like I need a set... I'm sure it's been asked a hundred times but here it goes... I want a pretty hastle free set...easy on/off, greasable?? are the Curie too pricey for what they are?? or are they worth it? is the better question...
|
| Buying a new Jeep... | 29 May 2005 15:18 GMT | 7 |
Is it at all possible to buy a new Jeep Rubicon without all the B.S. for the front desk clerk, salesman, manager, appraiser, finance manager? I have spent three weeks trying to buy a new car and all I have run across is liars, cheaters, thief's, crooks and more liars.
|
| FINALLY getting my lift, now what lift to get is the question. | 29 May 2005 14:50 GMT | 5 |
Well its graduation time and i have been saving money since February. I have around $800 now and expect to have around $1000 in a week. (oh and my dad is going to buy the tires, 33" BFG MTR) My goal is a 4" short arm kit. I have been told the kits from Full
|
| What now?? (Clutch slave again) | 29 May 2005 06:38 GMT | 11 |
Ok, got the clutch slave in and installed it. Something just wasn't right -- I couldn't get the fluid to flow from the master cyl through the line and come out of the bleeder on the slave. Kept pushing the clutch in and out until I had worked my way through 1.5 master cyl's ...
|
| FREE TUB | 29 May 2005 03:21 GMT | 1 |
Free 83 cj7 tub, would make a good donor.
|
| Blower Motor | 29 May 2005 02:43 GMT | 6 |
I have a 96 jeep Grand Cherokee with Automatic Heating and Air. The Heater / Air Conditioner Blower continues to run after all switches are off and ignition off. The only way I can turn it off is by removing a forty amp fuse. Any suggestions on what might be at fault?
|
| BFG AT's on a heavy vehicle and around rocks? | 28 May 2005 16:05 GMT | 10 |
You guys are a great tire resource. I need tires for my '95 Land Cruiser. It came with Michelin AT's on it, but I broke one on a rock while doing some moderate wheeling on a camping trip last week. I like the snow performance of the BFG AT (this vehicle will be taking us skiing ...
|
| Pwr Steering Fluid Leak | 28 May 2005 15:55 GMT | 5 |
In my '93 Grand Cherokee, I'm losing a pint of power steering fluid every other day. It appears that it is coming from the bottom of the rack. Is there a seal there that I can get and replace? Any other things to check? Thanks all for your help.
|
| 1999 Grand Cherokee Check Engine codes | 28 May 2005 15:27 GMT | 2 |
check engine codes are p0203,p0202, p0204, p0206, p0207, p0208, and p0121 Engine does not seem to be missing so I don't know why the first six codes. The rpms will change suddenly when at and idle or just sort of coasting
|
| Good Shocks for 2000 JGC ????? | 28 May 2005 10:58 GMT | 5 |
I am trying to find a good set of shocks for the above Jeep. I tried Dousetech (spelling), but they sent me the wrong set for my Jeep, and will not respond to my dealer's efforts to replace them. I have heard of Gabriel Ultra shocks. Has anyone used these on a Grand
|
| Drop Pitman arm or Tie-rod flip kit? | 28 May 2005 04:22 GMT | 1 |
I'll be going SOA on my 89 YJ next weekend. I've heard it both ways for either getting a 4" drop pitman arm or doing a tie rod flip kit. I'm partial to the tie rod flip kit as it helps to protect the tie rods. What's the verdict on both?
|
| "Lights on" chime not working (97 TJ - doors ON) | 27 May 2005 18:23 GMT | 32 |
I see there are quite a few posts on this topic but I'm not able to find the answer to the problem. The "lights on" chime when the engine is turned off is not working on my 97 TJ. I searched older posts and realize that the #4 fuse behind the glove box needs to be in for this
|
| Just to let everyone know | 27 May 2005 14:09 GMT | 27 |
Went to the Stealership today to see what they had, they had already sold the red unlimited rubi a few weeks earlier, and they had a kaki one on the lot. It had all the options I wanted, but hadn't thought about the kaki, but my wife said she liked it, so I looked at it a little ...
|