| Thread | Last Post | Replies |
|
| How much $ to charge for engine assembly? | 05 Jun 2005 23:52 GMT | 10 |
Hey Everyone, A neighbor asked me to do engine work on his Chevy 350. Basic small-block, 70's vintage with carb. He paid for the parts and machine work. I had to figure out what cam he should use, parts
|
| THANKS MIKE ROMAIN | 05 Jun 2005 20:15 GMT | 2 |
I HAVE BEEN DEALING WITH THIS HARD TO START JEEP FOR SIX MONTHS THE CLEANNG DID THE TRICK
|
| Mike Romain ---> U R the MAN!!!!! - A follow up to ECU blowing fuses | 05 Jun 2005 20:12 GMT | 4 |
Mike, You couldn't have been more right if you'd been standing next to me. I got under the truck the other night, followed the O2 sensor wire, and sure enough.... a snag which had broken the insulation and had
|
| 97 Wrangler Tires | 05 Jun 2005 15:10 GMT | 1 |
Folks, It's time for the wrangler to get new tires. I use the truck mostly for highway driving and my local Mavis (hey, I'm poor) wants to sell me either a Continental (highway) or a Kelly tire. Any suggestions on which will give me
|
| How much $ to charge for engine assembly? | 05 Jun 2005 07:56 GMT | 6 |
Hey Everyone, A neighbor asked me to do engine work on his Chevy 350. Basic small-block, 70's vintage with carb. He paid for the parts and machine work. I had to figure out what cam he should use, parts
|
| Geezer Test | 05 Jun 2005 07:51 GMT | 5 |
Ignition wrenches Do you know what they are? Owned mine for 40 years (Craftsman) Do you still use them for what they were designed for?
|
| What do you do with the Soft Top Windows? | 05 Jun 2005 05:04 GMT | 8 |
I fianally saved up enough to buy a soft top for my 2003 TJ which until now has been a hard top only. I have seen two products for storing the windows, 1. Clover Patch Window roll which mounts to the roll bar and keeps the windows with you 2. Mopar Jeep Window Bag at the ...
|
| CJ5 Detachable Sway Bars - Possible to retrofit? | 05 Jun 2005 02:38 GMT | 1 |
I am interested in getting an older CJ5 (1974 to 1975) but was told that the ones I am looking at are difficult to drive on the highway. Is it possible to install detachable sway bars? Also, approximately how much should I expect to spend for lockers with
|
| sillybugger pricing | 05 Jun 2005 02:13 GMT | 9 |
Ok.. my story on stealerships. I need about 18 new plastic popthingies that hold on the door plastic. The old ones are breaking and the door squeeks.
|
| UK owners - Cherokee insurance quotes | 04 Jun 2005 20:39 GMT | 13 |
I've just been told that my previous insurance (AXA) is moving out of car insurance. I've been online and had quotes for between £350 (Halifax) - £450 (RAC), with some between (£420 - Directline)(£353 - First Alernative). Lots more than my old Landrover 110...
|
| Power window problem w/ '99 Jeep Cherokee Sport | 04 Jun 2005 20:07 GMT | 4 |
Question: Does anyone know the part that normally fails when the pass side power window on a '99 Jeep Cherokee fails. In this case, I can hear the motor spinning, but the window does not move. However I can move the
|
| Man oh man do I hate Rust! Rant! | 04 Jun 2005 13:19 GMT | 5 |
Once again the rust belt bites my poor Cherokee.... The brakes failed. Low pedal and red dash light. All new (2 years or so) pads, shoes and master cylinder with a recently failed emergency brake.
|
| 1999 jeep cherokee power windows | 04 Jun 2005 03:49 GMT | 2 |
None of my power windows work in my car, it is not the fuse. The strange thing about how they went out was that I could open and shut my driver side door and then they would start working again, but they finally just stopped working totally. Please help me!
|
| Best hitch for '01 XJ? | 03 Jun 2005 22:55 GMT | 9 |
I want to add a hitch to my '01 XJ, more for the accessories I can add that utilize the receiver than for actual towing. At most I may end up towing a small trailer for my motorcycle. Still I figured a
|
| CJ Dana 30 question | 03 Jun 2005 20:25 GMT | 4 |
Are the stock axle ujoints greasable in a mid-80s CJ? Thanks.
|