I just rebuild an old CJ7 85 258 cyl. After 5-6 hours of running on idle I
shut the engine for a week.
After a week, I started the jeep and it start empty the engine oil through
the filter.  I shut the engin, remove, clean and put back the oil filter and

If anyone is interested...
I got a Thule 830 kayak stacker to go on my wife's car.  It's the first
one I've had that holds the boats on their sides (it will let you haul
up to 4).  But, we have ocean kayaks that are rather long and with the

My jeep idles around 700 rpm in neutral.  When I
pump the brake pedal several times quickly the
rpm picks up about 300 rpm (to about 1000).
I've had it a couple years and its always done it.

Just checking the service.. As no new messages have appeared since Last
week.  We know Bill can't go that long without posting :)
Snow...

I've posted this a bunch of times but haven't gotten a response. I'll
try again. My mirrors keep moving now. Both of them fold in at highway
speeds. Is this normal when they get old? Should I just buy new ones?
--Brian

Any one interested in a set of 5 Stock 15 x 8 Canyon Alloy rims please let
me know. They are in good condition. they have  few rock scuffs on them. I
will send pictures upon request.
They have a set of stock Goodyear GSA's on them 30 x 9.5 with 54k miles on

Hate to do it, but the 'ol finances have changed and the YJ has got to go.
See http://seattle.craigslist.org/car/92761316.html for more info.
89 Jeep Wrangler, SOA, Tom wood CV and SYE, winch, 33" tires, new top,
alternator, clutch, slave..

I would like to rebuild an engine for a '93 YJ Jeep. I want it to be a 6 and
4.0L. Are there any suggestions for a good engine to look for? Thank you.
TheosQube

The Jeep: 48000mi 2001 Cherokee Sport, 4.0L Auto.
The Incident: Driving along, suddenly there's engine light,
followed by check guages light, accompanied by ticking
from top end and no oil pressure reading on the guage.

Has anyone had sucess eliminating Jeep TJ RF noise?  Specifically, year
2000 or later?  I grounded the tail pipe to the frame, installed .1uF
bypass caps on the fuel pump lead (to ground) and am still experiencing
noise on 2m/70cm.  The bypass cap helped eliminate some noise, but ...

I'm new to the ng.
I've been looking for drivers real world mileage for the CRD, but mostly
what I'm finding are reviewiers that have only driven it a few hundred
miles.  Anyone like to share?

Guys, I found this site while surfing.  I hope it's ok to post because
these rides are for sale but there are so many Willys / Jeeps starting
from 1953 I only hear others speak of and have never seen.  My favorite
is the 1954 Yellow Highboy with Red accents.  Many cars are restored

As I understand it, the origin of people putting bells on motorcycles and
Jeeps comes from Jeepers awarding a cowbell to one of their group who has
rolled on the trail, both as a badge of honor, and a warning to others. I
was awarded by bell by older friends a long time ago.

Any idea what a typical front end alignment should cost for a 2000
Wrangler 6 cyl and how often it should be done.  Regular road
vehicle(little or no stup jumping).
Thanks

On Apr 8 at 7:58 pm Dean wrote: