| Thread | Last Post | Replies |
|
| wiring a signal switch in a 56 willys | 21 Aug 2005 22:15 GMT | 2 |
I am wiring the signal lights into a 56 willys pu. The spartan signal switch has seven wires coming out. 4 go to front and back, left and right turn lights, two go to the flasher which leaves one wire for the brake lights. This wire (brown) shows continuity with the two rear turn ...
|
| Mileage Allowance | 21 Aug 2005 16:41 GMT | 6 |
I need one of the car salesmen to tell me what the annual mileage allowance is for a used car. I have always thought the number was 12,000 for the USA, except California where the allowance jumps to 15,000. I am trying to value a car I wrecked, and they are using a number less ...
|
| Oil prices got you down? | 20 Aug 2005 21:09 GMT | 147 |
From another thread that was veering off-topic... Besides untreated water, name another liquid you can get for $1.50/gallon. Bill had mentioned California diesel prices hitting $3.00/gallon in another thread.
|
| 99 jeep cherokee won't start | 20 Aug 2005 20:35 GMT | 4 |
I just bought a used 1999 Jeep Grand Cherokee Limited Edition with a 4.0. Three weeks ago with 80,000 miles on it. After about a week of driving it, it died at a stop sign, started right up with no problems. The next day it died twice while driving. Both times it
|
| A small and pointless fuel study | 20 Aug 2005 08:26 GMT | 9 |
Just playing with excel and did a scatter of octane vs gas mileage. Interesting to see the higher MPG blobs. Those are associated with long distance (300-600 mile) highway driving.
|
| ATF+4 Passed on | 19 Aug 2005 11:39 GMT | 1 |
AUBURN HILLS, Mich., Aug. 12 /PRNewswire-FirstCall/ -- In response to marketplace demands and evolving vehicle technology, Chrysler Group has established a licensing program for its advanced synthetic Automatic Transmission Fluid, ATF+4(R). This program will allow ATF+4 to be ...
|
| Repair Kit for Defogger | 19 Aug 2005 04:57 GMT | 5 |
My rear defogger has seen better days and needs fixin'. I was wandering if anybody used those repair kits. Or does somebody know of a inexpensive way to repair those little lines on the glass some work most don't. Thanks alot
|
| Chrysler decides not to build any new plants in U.S., Canada, and Mexico | 19 Aug 2005 04:41 GMT | 6 |
Aug. 18, 2005. 06:43 AM Jobs to dwindle at Chrysler New CEO will focus on making better use of existing plants and workers TONY VAN ALPHEN
|
| REQUEST: 87 Jeep YJ Factory Service Manual. | 19 Aug 2005 00:36 GMT | 2 |
Anybody? The Hayne manual is not cutting it. Thanks in Advance.
 Signature Shawn
|
| Vapor Canister for '90 YJ | 18 Aug 2005 22:59 GMT | 17 |
I have been smelling gas fumes from my 90 YJ wrangler 4.2 L engine. Since I don't see any visible leaks anywhere, I suspect maybe the charcoal vapor canister may have died. The only problem is that chryslerparts.com says their system shows that this part is no longer
|
| emission controles | 18 Aug 2005 20:23 GMT | 8 |
I just replace my engine in a 1984 cj7 258 jeep. I have book showing the vacuum diagrams for emission controles. I need help where the location of the compontents are. Does anyone know where I might get this information?
|
| More slave cyl questions | 18 Aug 2005 19:05 GMT | 16 |
Got the new slave from the parts store today. It's looks the same except for a few differences. It does NOT employ the straps, or any other kind of retention device.. I'm guessing that if I don't move it, it should be OK? Also, it does not have the bleed line or main input line. It ...
|
| Flushing brake lines | 18 Aug 2005 17:54 GMT | 28 |
My neighbor and I flushed the brakes on his '96 XJ and My '02 WJ this afternoon. In both our Jeeps when the lines were flushed clean we found small black floaters in the drained fluid.
|
| Tinny harmonic type noise | 18 Aug 2005 16:12 GMT | 3 |
Et All, I have a 2000 TJ six cylinder that's developed a loud but intermittent tinny sounding noise/vibration which sounds like it's coming from the right rear of the vehicle. It's especially noticeable as I shift
|
| Transmission Cooler & Temp Gauge - 01 TJ | 18 Aug 2005 10:19 GMT | 6 |
I am putting a temperature gauge for the auto tranny just to monitor what it is doing. I am thinking about putting a cooler in at the same time. Can anybody tell me which one of the lines is out from tranny. I know I can take one of them off and just crank the engine and see ...
|