I have a keyless entry system(o.e.m) on my cherokee and i do not have the keypad. Is it possible
to install an after-market system into the o.e.m?? is it unplug old and plug in aftermarket
or is there a lot of splicing and dicing.
 o.e.m keypad is 125.00  and aftermarket system ...

Is there a consensus on the most beneficial tire rotation method?

Last years Nova Scotia Jeep Clubs Fall Crawl in the Annapolis Valley
http://www.putfile.com/media.php?n=Fall-Crawl---Nova-Scotia-Jeep-Club

Anybody had luck with installing some kind of seatbelt with a shoulder strap
on the back seat of a CJ? If so how was this done?
Thanks

2004 Jeep Grand Cherokee Limited
Inline 6 Cylinder Engine
Automatic Transmission
Stock - No modifications

I'd like to replace the stock single-CD (no cassette) stereo in my 2001
Wrangler TJ and I found someone selling a Mopar in-dash 6-CD system which
came out of a 2004 Chrysler 300C.
I'd like to find out if anyone knows whether or not this system can replace

Is it possible to buy/get this manual on CD-ROM, or download it (legal)
from
somewhere ?
--

Is it possible to add PS to a CJ5? If so where would one start? Thanks for
any thoughts
Tom

Replacing / repairing rusted rocker panels on 95 cherokee. Replacing the
antenna I already broke off a few of the bolts that hold the flares on.
Beforer i rip into the flares to get at rocker panels does anyone know where
to get the backing plate with studs? Or has anyone just ...

So.. new tires from Hibdon/Tires-Plus, but they are wearing on the
outside edge. not good for only 200 miles.
They did the alignment, they did it _WRONG_, so I take it back.
Three hours later they get to the ZJ and proclaim it fine. Yea,

 I have a 96 Cherokee 4.0. Sport. Just got it. It came with a factory
option, rear locking diff.
Would anyone know under what conditions this kicks in? Do you have to be
in 4WD low or high? or 2WD? No manual controls for it in the truck..

2 days ago I was reversing my '95 Cherokee (RHD) out of my driveway and when
I turned the wheel there was a very loud crack sound and I lost virtually
all steering control.  Didn't take long to find the cause-the steering box
had snapped off the front chassis rail. To say I am ...

Thought I would check my ignition timing on the 1990 256 YJ. Checking at
700 rpm showed only about 3 degrees advanced. I advanced it to 9
degrees. I  had to back the idle screw almost all the way out to get it
back to 700 rpm. The strange thing is that now after letting off the

Can anyone tell me where in the Durango or Cortez, CO area I can get a
Weber carburetor jetted for high altitude wheeling? I have been on the phone
with several different Tech. Support people over the past few weeks. The
best I can get out of them is that I need to go to Colorado ...

Found a  1976 cj5 for sale that seems to be ok to me. What are some
basic/usual problems to look for in this model?
Vin#... J6F83AA007###
3spd