What was factory tire size/sizes for the CJ-5 ?
what came on the one i recently purchased looks to be 32" tall 10.5" wide i
think.

I'd like to go 31" but would like a 9.5" tire.  Is there such a thing?
Also, why are some tires measure something like 30x9.5 and some 245/75?
 but still the same type tire?

98 TJ
new pitbull tires  35x14.5"
new rims, 15x10" granted cheap 4wpw steelies.
innovative balancing powder (yes, there is enough balance stuff in there - at speed

Whats the current 'trend' in DIY rust repair these days?  
My 20+ year old Cherokee is starting to 'go' and needs a body overhaul.
I prefer solder repair, am unkowledgable with MIG or TIG ....
so I guess the real question at hand is lead/tin solder still

http://www.ananova.com/news/story/sm_1534821.html
Maybe you were onto something, after all.
--
Old Crow

I have a 1996 jeep Cherokee with automatic transmission. I have a problem
that occurs only when I drive up a very steep grade for a long period of
time. I’m leaking transmission fluid that gets on the exhaust system. I
leak no fluid when I drive on level or slight grades. It never ...

Got two of the skid plates on today, the one for the fuel tank is on back
order, the one for the transfer case isn't available till November.
So far, so good and the dealer threw the whole them in on the deal, along
with a brand new spare set of floor mats.

I took my 2004 Jeep Liberty V-6  to the dealer for an oil change at 12,300
miles.  The service rep told me it was time to change the oil in the front
and rear differential and quoted me a price of $144.00.  Good deal ?  Any
comments?

I am looking for the T handle and latch and cable assembly for a 1990
Wrangler YJ.  If you have one or know of a source please let me know.  The
shaft between the handle and the internal assembly on mine has rusted
through so I think I will need both the handle assembly and the ...

I haven't come out here in over a year.  I come take a look today and
Earl is back posting!  Good to see you around again Earl.  Now I don't
even remember what I came here to look for?
Oh well,  my jeep rebuild lost steam all summer as I just had no time

I have a Low Pressure guage for what I KNOW to be for R134a.
My question is, are the fittings for 134 and 12 different so that my guage
will not fit any of the pressure ports on a R12 system?
I have a car in the driveway, and my guage fits the Low Pressure side. Since

I have heard some scuttle butt about adding a quart of ATF during an oil
change,,,,,
What does it accomplish?
Is there a benefit to doing this?

i changed out the fuel pump on my 98 cherokee thinking that was my
problem but still won't run
here's what happened---when i would try to start the jeep it wouldn't
start with the first turn of the ignition but ALWAYS started on the

Recently my turn signals, wipers, and radio stopped working in my 98
TJ.  I checked the fuses located behind the glovebox, and in the engine
compartment, they all looked fine.  Could this be a fusible link
problem?  Does anyone know where the fusible links are located in a 98

2004 Jeep Grand Cherokee Limited
Inline 6 Cylinder Engine
Automatic Transmission
Stock - No modifications