I have an 87 YJ with an 258 six in it and today I was backing out of the
driveway and it stalled...tried to restart..fired for a couple of seconds
then quit again...now it wont start at all....rolls over very well
....getting fuel...seems to be no fire...any ideas what to check

sorry for the late response. I broke my arm and busy at work.
I still have a problem starting my ZJ.  When it is cold it just starts
fine. When it is at "operating temp" it will not start. When it is kinda
warm it will start, but very rough, like it is out of fuel and then it

Is a trac lock a limited-slip carrier or a locker?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8005867661&sspagen
ame=ADME%3AL%3ARTQ%3AUS%3A1
Thanks
Carl

I had my  '94 XJ up on a hoist the other day checking something out and I
happened to also check the rear hubs . There seems to be an awful lot of
"float" in and out on the axle approximately 2 -3 mm.whats the problem , can
anyone help with a diagnosis.

I have an '88 YJ 258 4.2 6cyl 5sp man that has failed several smog checks in
CA.  The vacuum hoses are all messed up and the vacuum advance on the
distributor is always at full advance.  Should there be something that
controls the level of vacuum going to the distributor?  In the ...

I have just bought a 86 cherokee. with the 2.5l 4 cyl. and a 3speed auto
tranny I've got a few problems with it. one I was wondering if anyone nows
where I can track down vacumline connections online for it and the main
problem is the transmission shifts way to quick as soon as ...

Ok, here's the problem  on these nice rainy days when the windshield fogs up
the defroster has a hell of a time trying to clear it, the wifey is getting
a tad upset that she has to drive with the window open to clear the fog
(keeps complaining about getting wet... I already ...

Here's a short clip of the new trail that my buddy and I have been
building/clearing for the last couple weeks...
http://www.zippyvideos.com/5475887011556466/new_trail...jeep__land_rover/
The trail is located on my buddy John's land in North Kingston Nova Scotia

  I have an 02 Libby that I will be towing 4 down behind my RV.  I will
also be using it in the desert .. no heavy rock crawling but some pretty
good trails.  It has all the skid plates and the limited slip rear.
What is the best size and model tire??  It is running the stock ...

Before winter I want to pull my rear wheels and check the brakes and
lubricate the calipers. Are there any special tools I need?
Thanks!
Ken

I have 1993 Wranger 2.5 liter manual trans.
Tried to start good crank , switched relays around there good. Someone told
me the computer no good. Is there anyway to verify this?

Has anyone installed an electric replacement fan on a Wrangler? Is the
gained HP and added fuel milege worth the ost.
Thanks for any insight.
Tom

Calling on you CJ experts again ! Is changing the ball joints in an 82 CJ a
back_yard mechanic's possibility ?? ARe there any special tools required ??
(eg. oversized / odd sized sockets).
I have one upper (all original) joint with slack (ok ... slop) in it, .. and

Got a new selonoid pack on my warn MX8085 and had the MRV-B-7 rebuilt at a
local shop. New armature, brushes, ect.
Re-installed everything today and was in the process of spooling in my
cable. About 1/4 of the way through, the winch slowed down a lot, but kept

Whats the general concensus for amount of lift on a CJ for 33" tires?