My 87 YJ (258 auto) has a thin 2 row radiator
that I don't think is original or even OEM quality.
After doing the HEI and Weber carb upgrades
it has always seemed to run hot.  I would like to

Hey all,
I have a '99 JGC Laredo with almost 62K miles on it.  Got it 3 years ago
with 22K on it.  The tires were, for the better part, new.  About a year
and a half ago I replaced the front tires and had an alignment.  The

Will a locker out of a 3.08 geared rear end fit my 4.10 geared rear end?
Carl

http://peswiki.com/index.php/Directory:Acetone_as_a_Fuel_Additive
and
http://www.pureenergysystems.com/news/2005/03/17/6900069_Acetone/

Hey Bill, (or anyone else)
Thought you might like this:
http://www.pirate4x4.com/tech/billavista/Action/action.htm
KH

Saw on quadratec.com borla headers for my tj, at $478.95!  Not sure if this
price is high or not for headers, but are they worth it?  How much power can
I expect?  Also, wouldn't I have to change the rest of my pipes to get
anything out of it?  This jeep is the first vehicle I've ...

This weekend I patched together my rear window lift channel for the last
time.  It's more rust than metal and one of the brackets that engage the
lifting mechanism is held on with JB weld (for broad definitions of
"held").  Where have folks had good luck sourcing a new replacement ...

Is there any good exhause setups that will make my TJ 4.0 sound cool?  I
like the V8 dual exhause tat-tat-tat-tat sound.  Can that be done or is
it impossible with the 6 cylinder 4.0?

Any experience with the sailcloth replacement top for YJ's?
Worth the extra $$$?
Easier to get up and down in cooler temps?
Any fitting issues?

I have a jeep, tj 1997. Yesterday, the temp was some what cooler and I
turned on the fan to remove the moisture on the wind shield. Only setting
number 4 was working. Nothing happen one the first 3. Any ideas on this
guys?

I have an 81 CJ7 with a T-18 and Dana 20 taken from a 77 CJ5.  I'm
having trouble finding a way to determine whether I have the 18 and the
18a.
I'm getting ready to sell and want to be sure I don't mistate what I

OK, I own 2 Wranglers.  One, a '94, with the 6 cyl/5speed.  The second,
a '95 with the 4 cyl/5speed.
They both just turned over 205,000 within the last 2 or 3 weeks.
My Jeep(the '95)started bucking and cutting out, but only after driving

How many studs on an F-134 exhaust manifold? I've got 3 nuts off with a
struggle, manifold won;t budge. Are there more studs under middle two pipes.
I'm too lazy to get mirror.

What should be the approximate coolant temperature when the engine is
working on idle? Mine sets onto about 208 degrees Fahrenheit (98 degrees
Celsius) after cold start and 5 minutes of idling before I start driving. Is
this too high? Could this be the reason of somewhat rough ...