Was thinking of an OX locker for the front of my jeep, but web site
doesn't work and neither does email, are they still in buissiness?

Wow......
http://www.pirate4x4.com/forum/showthread.php?t=411332

 Well seems the http://www.oxbrand.com/ isn't much good for anything
either, clicking on anything like "home", "contact us", "or about us", just
brings you back to the same page, clicking on applications takes you to a
web site that reveiws products. So like everything else Ox ...

2000 Cherokee Sport 4L 95K,
I have completed work on my front end and in the process of replacing my
rear shocks.
Of course the rear upper bolts broke off.

Crazy question but where is the solenoid on this year jeep? I tried to
trace from hot terminal of battery but everything is going into a
flexible conduit. I traced on line into the fuse box, but then there is
an entanglement of lines. I would think it would be in a position to

OK, I...er a friend of mine, lost the injector retaining clips which hold
the injector to the fuel rail and the fuel line retaining clips which hold
the supply and return fuel lines to the fuel rail.  Its a 93 JGC I-6.  Went
to the dealer and they can order the injector clips, but ...

Just wanted to ask if anybody know of a source for doing up my front seats.
They are leather, color Tan I guess. But realy cracked and beyond repair.
What I am after is ready made leather replacement upholstry so I can do the
job myself. Not after market seat covers.

Time for my continuing search for winter wiper blades for my 2003 TJ.
The Jeep dealer doesn't carry 13" winter blades and the local parts
stores don't either. I tried to get them last winter and struck out.
Any body got an online source?

I like the look of the classic triangle hole white painted steel wheels,
not the softer reverse "D" shape of the black AR's everyone seems to
run. Are there any that match the YJ (with stock D30 and 35) bolt
pattern? I'm also looking to get my backspacing to 3.5". From whatever

I recently bought my Wagoneer. It ran great, but lately has went down
hill. About a week ago my Wagoneer would not go over thirty five
without cutting out. I would have to let up on the accelerator until it
would quit cutting out. It was not a good feeling being in traffic when

I Just recently bought a 1996 Jeep Cherokee and the front heat vents won't
switch to the defroster position.  The heater seems pretty strong in this
thing, but it's always blowing to the floor.  Are these vents working off of
vacuum?  Electric?

I know how to do it in my CJ.  :)
I understand the late '98 and '99's have a cust-off switch, but I need
to be able to temporarily disable it in my '97.
I searched the net and faq and didn't see anything so hoping one of you

I have a 1997 Grand Cherokee that says I have a failure in my tail lamps,
but there are no out bulbs. Does anyone know what might cause this?
~~~~~~~~~~~~~~~~~~~~~~~~~
91 Red Mustang GT

1994 Wrangler 2.5l 4cyl, with 5spd. Don't know which 5spd.
It is terribly hard to downshift into 1st, 2nd or Reverse when stopped.
It'll
shift just fine if slightly rolling.

Looking at a 1995 GC (ZJ?), 307k miles, auto tranny, full time case.  Was
wondering what I should be wary of / look for.  I know that it's a heap of
miles, but... in the end, is this vehicle needing tires and front axle U
jonts, worth $1,500?