| Thread | Last Post | Replies |
|
| Where is the keyless module? Gr Cherokee 96 | 26 Nov 2005 21:56 GMT | 6 |
I want to hook up my remote starter to the keyless entry module to unlock/lock doors but cant find the wires or module. Can someone help with the location of the module or wires ?? thanks
|
| A/C vent | 26 Nov 2005 21:49 GMT | 1 |
I have a 02 Wrangler and am experiencing problems with the A/C vents. When you turn them to of they stay on. The pressure and tempeture can be adjusted, but when turned off it still blows air like it is on the low setting. Any help on how to fix this problem would be appreciated.
|
| Spark Plugs -- Heavy load of light gray and black deposits | 26 Nov 2005 21:00 GMT | 2 |
My CJ began running rough last week, and I pulled the plugs to see what the trouble was. I need new plugs, but it was running so poorly, I resorted to a "trail fix" to see if the valves were still intact. (the valves are fine, I think)
|
| differential grinds when I turn | 26 Nov 2005 19:29 GMT | 11 |
my differential makes a grinding sound when I make A Right hand turn, I know that is not good. My question is how to fix it.
|
| Problems with TJ headlamp/dimmer switch? | 26 Nov 2005 18:27 GMT | 18 |
As anyone experienced problems with the factory headlamp/dimmer switch assembly? My head lamps appears to switch on and off if the knob jiggles. I think it's a bad contact. I sprayed electrical contact cleaning inside, but it didn't help.
|
| 85 CJ Wiper Motor Link - Any Sources? | 26 Nov 2005 16:10 GMT | 2 |
I need the small link that runs from the wiper motor to the wiper bars. Anyone know of a good parts source? I'm also in the market for a YJ tailgate latch, striker, etc. http://img384.imageshack.us/img384/4056/wiperlink18nx.jpg
|
| Winter GW Blues | 26 Nov 2005 00:44 GMT | 14 |
My '84 GW doesn't like to start in the winter. It turns over ok to begin with, but then it gets weaker and weaker as I crank it. I thought these were supposed to be good winter rigs? I new I should have bought a Santa Fe instead.
|
| 95 XJ starting problem. | 25 Nov 2005 21:09 GMT | 5 |
95 XJ I6 automatic. New battery, plugs, wires, cap and rotor 2 weeks ago. Jeep drove to Mississippi and back (Wisconsin) - no problems. Wife moved jeep out of drive on turkey day, no start that evening - tried
|
| Left LoBeam Out, Turn Signal Warning Signal On | 25 Nov 2005 20:05 GMT | 5 |
2000 Jeep Grand Cherokee Laredo Headlights on - left low beam headlight doesn't work. After a period of time, with the headlights on, the overhead command module advises that my left turn signal is on (it's not).
|
| MOVING!- '89 JEEP COMANCHE- 2wd, 4.0L, 6 cyl., 5 spd., | 25 Nov 2005 19:25 GMT | 1 |
$1200.00 OBO This has been a solid little truck that I hate to sell. That perfect vehicle for the weekend get-aways and getting your junk to the dump... Drives great and always starts and runs like new... In the last year
|
| Dieseling | 25 Nov 2005 17:22 GMT | 5 |
My 1990 Jeep YJ, 258, has started dieseling after shut off. Does it about one half the time. I think I have the idle and sol-vac solenoid set OK, but maybe not. I tried disconnecting the vacuum and power to the solvac solenoid figuring that maybe the carb was being held open a
|
| Something to be thankful for | 25 Nov 2005 08:17 GMT | 1 |
That you are not this guy, who is apparently impressed with his work http://www.pirate4x4.com/forum/showthread.php?t=411332 My nominee for "Dunce of the year"
|
| radiator leaking on 98 TJ | 24 Nov 2005 20:19 GMT | 6 |
The dealer wants almost $500 for a new one. Are there aftermarket ones that are better and cheaper? I'm gonna have the dealer install, but I'm not sure if they will install aftermarket stuff.
|
| WV wheelin' pic (at bottom) | 24 Nov 2005 18:55 GMT | 4 |
http://forums.mountaineeroffroad.com/viewtopic.php?t=2932&postdays=0&postorder=a sc&start=15
 Signature JimG 80' CJ-7 258 CID, HEI
|
| CJ Gauge Question | 24 Nov 2005 14:47 GMT | 1 |
I need to replace the voltmeter and oil pressure gagues in my '85 CJ-7, and don't want to order up the wrong gauges. I meaure the cutout to be 2", and lots of gauges are spec'd. out as either 2" or 2 1/16". Are they the same thing? does the 2 1/6" size add in the bezel, therefore
|