After having the throttle body sensor replaced, everything was running good
for a week. I knew it was going to start shuting off on me when I was
slowing down. Now my car shuts off as soon as I start the car and also it
hesitates to start at all, and sometimes I have to put my foot ...

I have a 86 Jeep J-10 with only 44,000 miles . It's had clunk in the
rear diff. ever since I got it new but I didn't think the "mechanics"
at the dealer were capable of fixing it and I didn't have time to take
it elsewhere so I lived with it. They did replace the axles. I finally

Dear Professional,
Equipment, tools and plain old 'stuff' keeps on getting more advanced,
heavy and expensive. People need to move this equipment from place to
place

My 88 Jeep Wrangler sometimes blows black smoke when started.  The
smoke leaves a wet mark on the driveway that looks like someone took a
spray can and lightly sprayed the area under the tailpipe.  The smoke
usually disipates rather qickly.  From what I have researched, it is

I just picked up a 74 Cherokee (360/T-400/Quadra-trak) mainly for the D44
axles and will be driving it home this weekend.
Since my frame is cracked, i have another Jeepster frame and will do all the
swapping at once, and am considering just putting my engine/trans/ T-case in

How much of a direct swap is it to go from the Peugeot BA 10/5 to the
AX-15 in my '88 Wrangler with the 6 cyl 258?  Are there special
adapters, drivelines, input/output shafts to buy?

hello group i have another question and need some help. on my 93 xj i keep a
toat in the cargo area and it covers one of my rear speakers and when i fill
up the cargo area it covers both of them and covers up the sound for the
people in the back seat. is there any kit or another ...

 Has anyone, ( I'm sure they have ) put flush mounted tail lights in their
CJ, or YJ. Questions are, what brand, do you need the flasher, and what did
you do about back up light???
 I've gone through 3 lenses and 2 sets of lights on my CJ, not to mention

The oil pressure gauge in my jeep doesn't work.  I took
the cluster apart and the gauge is an open circuit (plus is
full of corrosion).
Anybody know where you can get them?

Jeep in the past couple of years sure has changed their models and the next
couple sure do not look any different.  I guess change is inevitable I just
hope they just don't totally hose things up. I can't remember when so many
changes have been made in the Jeep line.

Just bought my first Jeep. Drove it back today. 170 highway miles. The wind
hitting the vehicle was so loud that I could not hear the cellular phone
ring. Also conversation needed to be at a yell. The only way I could take
this kind of noise on a long trip would be with ear plugs ...

I have a 1988 Cherokee with stock height, tires and rims. I am looking
at a set of tires and rims in ebay wich are 31x10.50R15LT; I know the
rims will fit but will the tires fit my vehicle w/o having to lift it?
Let me know? Thanks.

After finally cleaning my tires today I noticed a small chunk of rubber is
missing from one of my tire's sidewalls (Rear driver side). I've been
wheeling them pretty hard for the past year or so, so I guess I can't
complain it took this long... it is down to the threads, so I ...

Not a Filter!  Not a Pill!  X2O is a tea bag (sachet) of natural
ingredients that transforms ordinary water into a SUPER BEVERAGE that
will ENERGIZE, DEFEND, CLEANSE and ALKALIZE your body like NO other
beverage can!

Hey Everyone,
 Once again Quadratec has dropped the ball for me.  Two months ago I
ordered body mount channels because mine are shot.  I need to replace
the body mounts and metal channels that go to the frame.  Only place I