Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Jeep / January 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
2002 TJ-problem filling gas tank21 Jan 2006 21:43 GMT9
I've got a couple of problems; my gas tank and military claims office.
I can't fill my tank at anything less than 1/4 speed.  If I try and
pump full speed, the pump shuts off or sometimes spits fuel back out of
the tank onto the ground.
Battery going dead!21 Jan 2006 21:40 GMT19
88 Cherokee
4.0 IL 6
Auto trans.
High miles - 300,000 +
motor or tranny?21 Jan 2006 20:50 GMT6
Hello folks. I've got a 92 xj (116k on body) with a motor from a 96 gc
(4.0). The other day I noticed a tick, like a fan cover was hitting a blade,
but alas not that easy. It seems to be coming from the motor close to the
firewall. Oil pressure is good, temp is good, idles fine ...
WIND NOISE 94 WRANGLER21 Jan 2006 18:37 GMT13
Just bought my first Jeep. Drove it back today. 170 highway miles. The wind
hitting the vehicle was so loud that I could not hear the cellular phone
ring. Also conversation needed to be at a yell. The only way I could take
this kind of noise on a long trip would be with ear plugs. ...
A progress report on Mr. Deutz21 Jan 2006 17:44 GMT18
As I reported some time ago I "adopted" a seized Deutz engine some
time ago with the understanding it would certainly need TLC and might
well be a sinkhole of money.
The good news is, Mr. Deutz is now a dismantled pile of parts in my
97 TJ 4cyl - ticking/tapping noise after replacement of plugged cat21 Jan 2006 14:45 GMT13
I posted a couple of weeks ago concerning a problem with my 97 TJ (4cyl,
auto, 130K) and a lack of power at freeway speeds. I got some good
suggestions on here, the general consensus being that it could be a plugged
catalytic converter.
V8 5.2 in Laredo but...ECU is not working21 Jan 2006 04:21 GMT20
I hope to find some help here about my problem. We made a real monster from
one Laredo (1985 year). After many working hours 5.2L V8 engine from GC
(year 1996) is now fit inside this Jeep. After we start engine it runs 8-10
seconds and than goes Off.  (fuel pump, map, temp,  and all ...
Peugeot BA 10/5 Drain Plug21 Jan 2006 03:54 GMT2
Does anyone know what tool you use to get the drain plug out of the
Peugeot BA 10/5? It doesn't seem to take a 3/8" ratchet head. It is a
square hole but I don't know what tool fits in it or what size it is.
98 ZJ Liftgate and Alarm Problems21 Jan 2006 02:58 GMT2
My liftgate sensor (window or gate - not sure) says the gate is open
whenever I flex the car.  Like going around a corner or into a parking
lot.
Occasionally the alarm goes off because it thinks the liftgate is open.
2003 Jeep Heater blows hot and cold air21 Jan 2006 02:48 GMT1
I have a 2003 Jeep Grand Cherokee. Sometimes my heater blows hot air and
sometimes it blows cold air.
Sometimes it only blows hot air on the passenger side and not the drivers
side.  Sometimes I have more heat than I can stand.  
1998 Cherokee XJ Door & Heater problems21 Jan 2006 02:38 GMT2
Just took delivery of a 1998 Cherokee, and mostly its fine, two issues
so far, firstly today one of the rear doors wouldn't shut, I fiddled
with the lock, and it shut fine, now I can't get it open, please help.
Secondly the heater, when I turn the fan to 3 or 4 there is lots of
Replace AMC 360 with 30421 Jan 2006 01:59 GMT5
I'm replacing my old 360 with a remanufactured 304 in my CJ7. Is it possible
to tell from which year an AMC engine is build ?
Any other things that I should consider, for example 360 parts that doesn't
fit on a 304 ?
Paint vs Powder Coat20 Jan 2006 18:25 GMT14
I in the middle of a frame off rebuild of my 93 Wrangler. Looking to either
paint or powder coat the frame. Any comments of pros and cons. Thanks.
Dennis
WRANGLER YJ - WHEN TO USE 4WD?20 Jan 2006 16:30 GMT14
Just bought a 94 Wrangler. The only other 4wd I have had is full time.
Exactly when can I put this in H4 and not hurt anything? More specifically I
mean I know to use it on snow, mud, gravel but am wondering about a paved
road during a rain? Heavy rain only? As long as the road is ...
Anyone Have Experience With Banks Torque Tube Exhaust Header On YJ?20 Jan 2006 12:29 GMT1
Has anyone here had any experience with Gale Banks' TorqueTube exhaust
manifolds on their YJs?  I had one installed on my '93 YJ with 4.0L 35K
miles ago, and this week, while going through the local KFC
drive-through at lunch, I noticed that the exhaust noise was louder than
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 December, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.