Anyone have one?  Is it reliable?  Problems?  I noticed that the warranty
went from 7 years on the 05 to 3 on the 2006. Is there a message in that?
Thanks

I purchased front and rear 1 inch lift kits for my 1995 Wrangler.  The Front
went on smooth as silk.  the rear bolts cannot be removed unless I drop the
Gas Tank.  No installation instructions say this, but it appears this is the
only way.

Here ya go Kate.
Here's a shots from 9Am, 2PM and 5:30 today
Made a little progress today, more tomorrow.
http://home.goldrush.com/obsoelyt/IMG_2790.jpg

93 YJ I6 automatic
Recent (last 4 months) changes - new distributor cap, wires and plugs, new
battery, and new fuel filter.
Periodically (last 2 months) the jeep will crank and crank and crank and not

My 1993 Jeep Grand Cherokee recently started having starting issues. At
first it would start after 2-3 tries, but now it continually takes
longer and longer to get it to turn over. First I thought it was the
battery (weak or being drained), but after a full recharge and

I have what I think is a rod knocking.  My question is this, should I change
out all of them or is this something that I can get away with only
replacing/repairing the bad one?  Its on a 75 CJ5 with the 232 I6, and I am
almost positive that the guts are all original.

some guy on craigslist in Santee. I don't know him but i like the price.
http://sandiego.craigslist.org/zip/137319486.html

Hey ... this is probably a stupid question, but here goes.
I just bought new lift struts for my XJ, and they seem to have completely
freezed up.  I took them out of the package, and can't move them at all.
Can't compress them, can't extend them.

i have a question i have found to be answered on this news group, but
never specificaly to my jeep.
i have a 2000 jeep grand cherokee V-8 5.2L all wheel drive.70,000 miles
just recently the oil pressure started dropping.

I recently had to replace the hydraulic line between the Master & Slave
cylinders of my YJ. After fitting the new hose in successfully, I'm
getting severe leakage coming from the master cylinder.  I believe it's
coming out of the connector piece.  I know I can go online and buy a

I'm trying to increase my MPG and have decided that the car changes
down to easliy, and would like to adjust the gear change to stay in or
change to a higher gear more often, is this a simple adjustment?
Thanks

http://www.cumberlink.com/classifieds/?loc=detail&main=MERCHANDISE
Listed under absolutely free...
FREE FILL, you haul. 776-7709 or 385-1513.
Save ad

Does anyone know where I can find differential covers and a auto
transmission pan with drain plugs that will fit my '96 grand 4.0 selec-trac?
Best Regards,
Marcel

what is the performance differance with wide and narrow tires. which is
better. i have 10 in wide rims. do u suggest i get narrower ones or can
i still get good tires on them. also im doing a SoA and was wonder if
anyone had problesm with haveing 7 inches of lift, not sure if i want

Hi! Wondering if anyone knows of a bolt-on spring over kit.
Also wondering about the weld-on kits. How critical is the heat and possible
weakening(sp) of the axle. I can weld, but I am by no means a expert. The
welds are solid but ugly.