Hi,
Is a 1-ton arbor press enough to press-fit the bearing and retainer
ring on a axle shaft without too much trouble?
If not, what would be enough?  A 2-ton arbor?  A 12-ton hydraulic?

2000 TJ Sahara
6 cylinder
Automatic Trans
30,000 miles

For the life of me, I can't locate the blower speed resistor. I only have
max speed, and would like to check the resistor before tackling the dash
control looking for the problem. Wherezit at?
TIA

Greetings. I'm new to the group & will shortly get a 2000 wrangler hand me
down with 80k on it. Can anyone pls tell me what sort of maintenance
should/should've be done? is there a link to an archive? Is there a site
devoted to this?   many thanks in advance & regards,    bobdrob

Today the Check Engine light came on and the auto trans will not come out
of 1st gear on my 94 Cherokee with a 4.0. I checked the codes and got a
code 24, TPS sensor. Anyone know if the TPS sensor crapping out would cause
this? Thanks for any info!

My '88 Grand Wagon's trim at the bottom of the side windows is dry, cracked,
and chipped. It's especially a bother when you have the driver's window down
with your arm on the window, as it scratches you. Has anyone seen
replacements for sale anywhere?,

I have a stock 98 Wrangler with 31x10.5 that my wife went off the road in
and into a small ditch.
No apparent damage, pulled/drove it out and drove it home.
Went and had an alignment done to make sure things were good. An adjustment

I've been eyeing peformance chips for my 2004 Jeep Wrangler (4.0 l ).  Has
anybody had any experience, good or bad, with these things on Jeep
Wranglers?  Thanks in advance.

Any thoughts on TrailMaster lift kits. I'm thinking of a one for my 93
wrangler.

Greetings. I'm new to the group & will shortly get a 2000 wrangler hand me
down with 80k on it. Can anyone pls tell me what sort of maintenance
should/should've be done? is there a link to an archive? Is there a site
devoted to this?   many thanks in advance & regards,    bobdrob ...

Thought this was funny
http://www.worth1000.com/emailthis.asp?entry=128531
Coasty

http://www.jeepnewsnow.com/modules/news/article.php?storyid=958
Any thoughts?
Personally, I like the woody look on the old Grand Wagoneers, I'm not to
sure about this

A friend who has one that is about a year and a half old started having
pulsating brakes about a month or so ago. The dealer said that part of the
car was out of warranty and refused to help him. He called Chrysler and
ended up talking with a "ditsy-sounding girl" who said brakes ...

any good sites recomended for info on frame cracks on CJ's?

I have to drop the large skid plate covering the tranny
to do some exhaust work. Do the six large bolts go
into the frame, or are there nuts and washers
involved?