This was our Annual SoCalXJ Jamboree. It was Held in Johnson Valley, CA
http://shell.exo.com/~cal/socalxj/
Right click and save the scxj7.wmv
Mine was the red one with a busted front shaft and ball joints trying to

anyone running Detroit Tru Trac?? they sound pretty good but read
somewhere they aren't very strong and are little better than an open
diff when the going gets really rough,

I have a 79 CJ5 that, when I bought it used several years ago, was 100%
off road.  It had a very stiff leaf spring suspension.  I use it just
in town, and to get a smoother ride, I took 2 leafs off of each wheel,
and the jeep runs a LOT smoother and sits an inch or two lower --which

Hey all, long time reader, first time OP-
I've got a broken speedometer. '93 YJ with a 2.5L and a 5-speed.
When I bought it, the speedometer didn't register at all, and the odo
was stuck at 100,722 miles. The speed sensor had the stock speedometer

It's a bad problem to have during rainy season, but my wipers will only work
on the highest speed.  Intermitent will not work and neither will low speed.
When I turn the wipers off from high speed, they will not return to the down
position off the windshield.

Vehicle has pulled to the right since new.  It is now at a point where it
was recommended that I put in offset ball joints as there is no castor
adjustment in the original ball joints.  Dealership wants 200 for the part,
found them online from moog for +/- 60.  I explained to the ...

I have a 2001 Grand Cherokee Laredo, I am getting code P0301 with the check
engine light. That means misfire in cylinder #1. So the question is...should
I take it to my Jeep dealer or the local mechanic.
I am always leary of the dealer (high prices) and afraid the local guy will

Need to lock up valuables too big for center console ... a box that
mounts where back seat used to be. Is there a place to purchase such an
item?
thanks

Looking for suggestion on bolt-on SOA kits.  Need one for my '85 CJ-7.  Who
has what.  Why is this kit better than that one?  Where to buy the kit?
Please help me with this project.  Not any good local shop to help me out.
TIA

 I don't know much about shocks, but everytime I've picked up a new shock
that someone is putting in, or on a store shelf, they are compressed, and if
released they come out and are very hard to push back in. Well doing my
front axles I have shocks dissconnected, there is no ...

As we all know, the owner's manual that came with the vehicle (the one in
the glove compartment) does not go into much depth.
In your experience, what are the top 2 or 3 shop manuals for the owner of an
'04 Rubicon?    Factory?   Chilton?  Haynes?    Other?

Looking for a used 5 speed transmission for an 87 YJ....Preferably in the
Kingston and surrounding area...

'61 CJ3B
The diaphragm broke on the fuel side of my glass bowl fuel pump. Too old.
The vacuum side diaphragm is OK. Does someone sell replacement diaphragms or
am I looking at a replacement pump?

Just wondering what the height measure on tires is intended to mean.  My
31*10.5 BFG TA's, with 30 PSI, on a 3,500 lb TJ, with about 2/3 tread left,
measure 29 5/8 tall.  Is  the measured height usually that much less than
the "spec" height?

After removing the grille from the sound wedge speakers, how do you get the
speaker out?  It seems like something else is holding them.  I've tried a
little prying, but nothing is giving easily.