I've got an SR-4 tranny in pieces (I didn't take it apart) that I want
to get back together.  I'd really like to find an actual assembly
manual.  I've got an exploded parts diagram but I'm concerned that it
doesn't tell the whole story.  If someone has the pertinent info they

My wife and I were considering buying the 06 Commander and wanted to see
what others thought of this vehicle.  Has anyone heard of any major
issues or potential problems with this model?
Thanks in Advance!!

I need to find a source for an Instrument cluster (panel and all) for
my '84 Grand Wagoneer.
If anyone has a suggestion as to where to find one, I would be very
grateful.

I about to lift the body off the frame of my 93 wrangler. But three bolts
will not move.
Two are just plain tight the other is spinning. I can not get to the
nuts/plates to stop them from spinning. Any suggestions or help?

Looking for the location of the wiper control module on a 93 ZJ?  also is it
the same part number as the Xj?
Snow...

they got ride of the 4.0 and are using a 3.8l v6 from mini van... what
dose everyone think about this new engine?

I need the intake/exhaust manifold torque specs on a '95 3.0L GC.  Recently
had some work done and need to re-torque the bolts.
Thanks in advance.
-Bill

  2000 Jeep Cherokee Sport,4L 4WD.
Need to replace the transfer case rear output seal.
Before I get under there can somone tell me what they used to seat the
seal? Will a deep socket work or a cut section of PVC pipe?

After going wheeling last week, I found I really do need more height and
bigger tires.  My 85/91 YJ-7 has the 258 and T-5 tranny along with stock
diffs with 3" of body lift and 31-10.50 TRXUS tires, but needs more
clearance for larger tires.  I have plenty of clearance with my ...

Ok, this is a hair OT because it's about a ford, but...
I've got a Ford Econoline van (F-150) that is having a hesitation
problem. Details...
It seems to mainly happens starting when you reach 35mph. It happens

Some have brand names, but I can't help but think and wonder "what's
up" when I see brand new Cat Converters for my Grand Loredo on Ebay for
$75.  I think a saw a whole muffler assembly (cat-muffler-exhaust
w/pipe) for like $175.  On first blush I'm thinking this has got to be

Hey folks,
I've always made my radiator bug screens from ordinary window screening.
I need a bug screen for my 97 TJ.  Here in S. Texas, the bugs are plentiful
and almost big enough to carry off my lil Jeep.  We have more bugs than a

I am planning on switching over to Synthetic oil for all my vehicles
including my 02 TJ.
I figured i would go with Mobil one, but then i found that mobil makes 4
types of synthetic.

Does anyone know what size and type wrench I need to remove the oil filter
adapter from my '93 ZJ with a 4.0.  When I say oil filter adapter I am
referring to the aluminum part that attaches to the block and performs a 90
degree turn and the filter attaches to it.  I have read a few ...

I just bought a '99XJ Sport w/ 4.0L yesterday. It runs great, like new, but
I noticed this morning that when I start it the oil guage is pegged max up
to 80. it does go down when warm to about normal (30-60) but shoots up max
to 80 again when moving or reving the engine. My old ...