I busted my side mirror glass. I found 5013-636AA which appears to be
the glass only for around $65. Seems a little steep (that is an online
price).  Are there any other alternatives that will look half way
decent?

I've been reading on google all the newsgroup posts about XJ's not starting,
and have been reading alot of good info.  I have something to run by ya'll.
I just bought a 90 xj with 140000 miles on it.  The previous owner said it
wouldn't start anymore and sold it to me cheap.  I've ...

 Just wondering if anyone knows how much torque to put on the spindle nuts
on an 81 CJ7 dana 30, I'm talking about the 5 - 1/2" stud nuts that hold the
spindle on the knuckle.
Greg

My 02 TJ developed a leaky main seal after the Oil pan had to be replaced
due to a mishap with a rock.
I just had the dealer repair the leak and the next day it is leaking again.
I have heard rummers that once the 4.0 starts leaking, it never stops.

Quick question...
I'd like to put a tailgate from an 05 TJ onto my 97.
Do I need to swap the hinges or can I reuse those from my 97?
Thanks

Help please.  My 85 Scrambler, which I just purchased, has no running
tail lights or no brake lights even though the headlights, and front
and rear turn signals do work.  The interior dash lights do not work
either, but I assume replacing the head light switch will fix that

What is the best engine transmission combo and from what donor vehicle
should it be from for a CJ. Should I plan on keeping the Dana 300 and adapt
it to the donors transmission? I would like a nice reliable daily driver
with around 250hp from a small block and would like to do it ...

I have a 94 YJ with manual steering that has about 6 inches of play in the
steering. I never really notice how much play I had until recently. The Jeep
just seems to wonder more than usual when on the road. Also sometimes after
a long sweeping curve the steering wheel almost ...

Has anyone ever installed an overhead console from a Grand Cherokee in a
regular (real) Cherokee?
I decided to bite the bullet and get a new engine put in my 96 Cherokee
(the original 4.0 six developed a rod knock after only 300,000 miles),

It's been a while since my site was first mentioned here by a friend,
and I thought I'd take a minute to swing by, say HI to folks again and
give everyone an update on how I'm making out - no that I expect anyone
cares, but you know... ;)

I purchased my wrangler with a rhino type lining that appears to have
been sprayed or brushed on. HAve no idea how it is applied or any exp
in it before. I wuold like to extend some spots and re-apply in other
areas.

Wondered if anyone out there had ever swapped out an AX15 manual trans for a
factory automatic trans in a YJ. Seems easy, almost a bolt-in in thought,
but haven't heard of anyone doing it (with the stock engine). Only online
article I could find was to swpaa in a GM 700r.

Anyone have this?
http://www.jeepworld.com/accessories/wrangler/dolly.htm
If you do could you measure how high your YJ top sits when on it?
I'm thinging of getting this but not sure if my garage is high enough.

While driving straight (no turns), I heard a grinding noise. I was able to
feel the vibration and it felt as if it was coming from between the engine
and the driveshaft. I have a 2000 Jeep Grand Cherokee Laredo. I was traveling
about 40 mph and when I gave it more gas, the grinding ...