| Thread | Last Post | Replies |
|
| fog and driving lites | 30 Jun 2006 23:07 GMT | 3 |
does anyone know how to or can direct me to a site that shows or tells how to install aftermarket fog and driving lites on a car(95 nissan maxima)????? please tell me or show me
|
| FS | 30 Jun 2006 20:31 GMT | 8 |
Only 31,750 miles!!!! Just getting broken in!! I live .5 miles from work and never did any real off roading. She's still a virgin. I am the original owner, I ordered it and babied her. I'm getting ready to trade her in, and considering serious offers before I do. This jeep
|
| '59 Willys with a surrey on top. | 30 Jun 2006 02:02 GMT | 14 |
http://www.billhughes.com/temp/59WillysJeepSurrey.jpg God Bless America, Bill O|||||||O mailto:LWHughes3rd@aol.com
|
| Best lift on YJ | 30 Jun 2006 01:37 GMT | 5 |
So now my teardown is complete and the body and frame are out to sand blasting I need to decide on a lift kit. I have a 93 YJ that will be intended for mostly beach driving and some off-road. I live in PA so I will be somewhat limited in my trails.
|
| Lift Kit Question | 29 Jun 2006 22:56 GMT | 1 |
I have a 2000 Jeep Wrangler 4.0 Liter 6 Cylinder 3 Speed Automatic. I want to have a lift kit put on it and was wondering if it would A: Affect my gas mileage. and
|
| Torque converter going bad? | 29 Jun 2006 19:04 GMT | 24 |
Veheicle: Jeep Grand Cherokee Laredo 1995 "Straight V6" Symtoms: I am driving and stopping at a red light, when the light turns green, I step on the gas, the engine would revs to between 3-4000 RPM
|
| Newbie Question: What accessories do Jeep most love? | 29 Jun 2006 04:07 GMT | 35 |
Hey! Newbie, here, just wanted to get a sense of what accessories or parts are most popular out there for Jeep Wrangler/TJs 2003. I especially had in mind which versions of products are most accepted and plugged, so for example, I'm thinking bicycle racks, storage rack
|
| 02 Liberty lift | 29 Jun 2006 01:20 GMT | 59 |
I am thinking about putting a lift kit in my 02 Liberty. Nothing radical just enough to get it up a little so I don't use the skip plates as plows as often as I do now. The Libby is towed behind my motor home so I don't want to effect the steering geometry or general ...
|
| Chrysler engineers are geniuses... | 28 Jun 2006 20:41 GMT | 16 |
My hat goes off to those guys. Anyone that can design a vehicle (Cherokee in this case) whose body can last for YEARS, while made out of metal just slightly thicker than your average two-ply bath tissue has GOT to be a genius.
|
| 2005 Jeep - Safety questions - Australia | 28 Jun 2006 19:41 GMT | 3 |
Hi Guys, does anyone know of any safety test reports for the Jeep after 2004? Cherokee here - known as Liberty in US. I can only find some from 2002. I'm interested in purchasing a 2005 Jeep Ltd I have a 5 month old and am concerned about safety, have heard they can be top heavy and ...
|
| Recover Accident | 28 Jun 2006 16:06 GMT | 8 |
http://i11.photobucket.com/albums/a157/pnut333/clevis.jpg Sad news. Sounds like they used a Clevis between two straps and had a strap break.
|
| 4 inch suspension nitpicking | 28 Jun 2006 14:02 GMT | 42 |
The lift on my tj right now came with 1 inch transfer case drop spacers, and only replaced the lower control arms for the front and back. I had the SYE kit added and a pair of adjustable upper rear control arms added so I could get rid of the spacers and adjust my pinion angle. ...
|
| Help Question Misplaced in thread | 28 Jun 2006 12:05 GMT | 1 |
I have an 88 wrangler with the 4.2L six. I parked it a while back when the hydraulic clutch wasn't engaging properly. I had no time to try and bleed it, or replace it. So...time passes. Its been parked for 4-5 months and I finally have time to work
|
| hex size for brake caliper????? | 28 Jun 2006 07:06 GMT | 4 |
sorry fellas - kind of an urgent issue - just pulled off the wheel to do the brake pads and replace the rotors and i cant seem to find a hex wrench that will fit the @#*#* caliper pins (in order to pull the pads) - i've tried 1/4" (too small), 5/16" (too big), 6mm (too small) and ...
|
| Paint for side bars | 28 Jun 2006 04:51 GMT | 12 |
Have a Jeep Wrangler with the nurf bars starting to rust. They are originally painted with a black powder coat. If I repaint them, what would be the best type of paint to use? I was thinking of using an epoxy primer with acrylic enamel. Any opinions? Also is there any way of ...
|