| Thread | Last Post | Replies |
|
| Dang! TJ Still Overheating | 04 Aug 2006 08:42 GMT | 5 |
'98 TJ 6 cyl. Manual- Replaced thermostat, water pump (yes, reverse rotation confirmed), hoses, radiator cap, and radiator drain plug. She STILL overheats! What next? Radiator clogged?
|
| Rubicon RE7000 4.5 inch lift - anyone installed one of these? | 04 Aug 2006 05:20 GMT | 1 |
The kit comes with new brake lines, but they don't appear to match up with the wheel cylinder properly. Paul Nelson
|
| "nutter" question | 04 Aug 2006 04:41 GMT | 3 |
hey all - 87 YJ 258 - just did the ol "nutter" and i am bit confused as to one thing: do i need to now use the capped off idle mixture screws? they are curently still sitting in their little capped off holes and the jeep
|
| Boycott Gettysburg | 04 Aug 2006 03:11 GMT | 8 |
Link to photos showing how the battlefield looked before superintendent John Latschar raped it. http://users.snip.net/~hart/ We loved Gettysburg: took dozens of week-long trips, spent many thousands of
|
| Last Year for Real JEEP | 04 Aug 2006 01:56 GMT | 11 |
What was the last year that Jeep actually manufactured Jeeps, before the brand was taken over by Chrysler? What were the changes that Chrysler made to the Jeep, and when did they make them?
|
| Transmission Woes too. | 04 Aug 2006 01:29 GMT | 2 |
My transmission slips only in first gear and only when in drive. When leaving a stop light and in drive the transmission will slip in first gear. If I leave the same stop light in L1 it does not slip at all. What could be the trouble. I am hoping Modulator valve. BTW its a 95JGC
|
| Starting a successful car wash does not happen by accident. We will | 04 Aug 2006 01:06 GMT | 2 |
Starting a successful car wash does not happen by accident. We will show you to carefully plan to start your car wash. We will explain how to manage your business on a day to day basis with information about market analysis and planning, advertising, employee records and
|
| Suspension woes | 03 Aug 2006 22:53 GMT | 1 |
I have been hearing a few different things while driving around. First, not everytime but sometime when I hit a bump in the road i get a nice thud from the front and rear when it hits the bump. Second, whenever I let off the clutch in firlst i get a nice pop from the rear
|
| 32x9.5s on a TJ | 03 Aug 2006 22:21 GMT | 1 |
Does anyone have photos of 32x9.5's on a TJ? I would like to see if they look too narrow/small on a TJ, but can't find photos of anyone running them. D
|
| off topic | 03 Aug 2006 14:40 GMT | 2 |
i cant seem to get any of the links that are posted. when i click on them, nothing happens. anyone have a clue, im using outlook express 6. thanks
|
| 1997 jeep ignition | 03 Aug 2006 02:03 GMT | 1 |
Having trouble starting engine. Starter and ignition fuses appear fine in the fuse box under the hood by passenger side. Starter turns over but appears to have no spark. Is there an inline fuse or relay somewhere else?
|
| Oil pressure sending unit - 95 JGC | 03 Aug 2006 01:53 GMT | 4 |
I know from reading a bunch of the subject lines and replies that this subject is touched on a lot, but I didn't see this answer. Why can't I find the oil pressure sending unit on my 95 JGC Laredo? I have a Haynes and it shows a picture. In the picture I see the edge
|
| '98 TJ Overheating Problem | 02 Aug 2006 22:41 GMT | 3 |
Engine was overheating. Replaced the thermo, water pump, and radiator cap. Flushed and refilled radiator. Engine is still overheating (temp gauge reads to the right of "210" or dead center). Also noticed no heat blowing inside from heater. Any ideas? Clogged heater coil? ...
|
| WHICH LIFT FOR JEEP WJ SHOULD I GET | 02 Aug 2006 16:17 GMT | 1 |
HI i got a 99 wj and want to lift it. I know i have at least three choices and wanted to get some feedback on which is the best. The three on my mind is the BDS 4'' the teraflex 4" or the rockcrawler 4" some advice would be great
|
| Here is a strange one | 02 Aug 2006 07:41 GMT | 10 |
Fuel pump went out on my 87 . 2.5 throttle body injection. Been working 6 day weeks. So i droped it off at a local shop i trust. Well they called today and said i needed a Fuel sending unit ? Well after looking in Haynes. It looks like its what the pump hooks to. Doesnt the sending
|